Eshop roka 2025 s vykurovacou technikou

PUSH-PPSU - 16 IVAR.PUSH-Z

Mã số: 88316820
Chưa được đánh giá Chi tiết đánh giá
7,79 € –20 %
Vykurovacia technika Viečko PUSH-PPSU - 16
7,79 € –20 % 6,23 € / Cái 5,07 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

PUSH - PPSU -tiiviste, IVAR.PUSH - Z, koko: 16, pakkaus: 10 kpl

 

Usein kysyttyä

  • Mitä työkaluja tarvitsen asennukseen? Puristusliittimet vaativat erikoistuneet puristuspihdit oikean tyyppisellä leualla (yleensä merkitty B, F tai TH järjestelmästä riippuen) sopivan koon ja tyypin liittimelle - ilman oikeaa työkalua liitosta ei voi muodostaa tai tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat puristusliittimet sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa jos puristus ei ole valmis) - ennen upotusta seinään tai tasoitukseen on aina suoritettava järjestelmän paineistus.
  • Voiko liitoksen purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitäisikö asennuksen suorittaa ammattilainen? Kyllä, puristusliittimien asennus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysasentajalle, varsinkin liitoksille, jotka upotetaan seinään tai tasoitukseen ilman myöhempää tarkastusmahdollisuutta.

Các thông số bổ sung

Danh mục hàng: Press- ja työntöliitokset - PPSU
Bảo hành: 2 năm
Trọng lượng: 0.012 kg
EAN: 4013960368055
Liittimen tyyppi: tulppa / kansi
Putken halkaisija: 16 mm
Materiaali: muovi
Liitäntätyyppi: työntöliitos (push)
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 09.07.2026 22:09:29

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

N avatar của tác giả 19.10.2026 10:33
Buongiorno, ho questi tappi per tubi e vorrei sapere se posso montarli da solo con un semplice martello o serve proprio una macchina speciale?
A avatar của tác giả 19.10.2026 10:33
Ciao Nicola, per questo tipo di raccordi a pressione non basta il martello, serve assolutamente uno strumento specifico tarato sulla misura del tubo. Ti consigliamo vivamente di affidarti a un idraulico professionista per garantire che la giunzione sia perfetta e sicura.
G avatar của tác giả 25.09.2026 09:05
Ez a 16-os méretű kupak PUSH rendszerű csövekhez való, vagy press csövekhez is passzol?
A avatar của tác giả 25.09.2026 09:05
Ez kifejezetten PUSH típusú csövekhez készült, press rendszerhez nem kompatibilis. A 16-os méret a 16 mm átmérőjű PUSH-PPSU csövek lezárásához való. Ha press rendszered van, ahhoz külön press zátkat érdemes keresni.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.