Eshop roka 2025 s vykurovacou technikou

Puserrusliitinsarja holkilla - 1/2"Mx20x2 ALU IVAR.RR 4608 N SET

Mã số: 460812
Chưa được đánh giá Chi tiết đánh giá
10,16 € –19 %
Vykurovacia technika Sada zverného šróbenia so vsuvkou- 1/2"Mx20x2 ALU
10,16 € –19 % 8,13 € / Cái 6,61 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Puserrusliitin holkilla, IVAR.RR 4608 N SET, koko: 1/2" M x 20 x 2, ALPEX, pakkaus: 1 pussissa / 50 koko laatikossa

 

  • PN 10, T= + 120°C
  • holkki ulkokierteelle 1/2", puserrusliitin Alpex-putkelle (IVAR.TA)
  • IVAR.RR 4608 N - ulkokierre
  • materiaali nikkelöity messinki CW617N, O-rengas EPDM
 

Usein kysytyt kysymykset

  • Miten valitsen oikean putkiosan koon? Kierteen koon on vastattava tarkasti putken tai varusteen kierrettä, johon putkiosa liitetään - nimessä olevat lyhenteet FF (sisäkierre-sisäkierre) ja MF (ulkokierre-sisäkierre) kertovat kierretyypin kummallakin puolella.
  • Tarvitaanko asennuksessa tiivistysainetta? Kyllä, kierreliitoksissa käytetään tavallisesti teflonteippiä tai hamppua tiivistetahnalla liitoksen täydellisen tiiviyden varmistamiseksi.
  • Täytyykö asennuksen tehdä ammattilaisen? Yksinkertaisen kierreliitoksen hallitsee perustaitojen avulla myös kotikäyttäjä, mutta jos puututaan jo toimivaan putkistoon (erityisesti kaasuputkistoon), suosittelemme kutsumaan asentajan, joka samalla tarkistaa liitoksen tiiviyden.

Các thông số bổ sung

Danh mục hàng: Puserrusliitin sarja supistussovittimella
Bảo hành: 2 năm
Trọng lượng: 0.129 kg
EAN: 8595145909032
Liittimen tyyppi: liitin (kierreliitos)
Putken halkaisija: 20 mm
Kierteen koko: 1/2"
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:09:34

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 14.01.2022 15:33
Zdravim. Potrebujem namontovat total filtet 3/4 na plast hlinik26mm mate nejake srobovacie prechodky
A avatar của tác giả 14.01.2022 15:34
Dobrý deň. V tomto prípade je lepšie, aby ste si zobrali Total filter s 1" s col pripojením a potom toto: https://www.atria.sk/zverne-srobenie-26-x-3-alu-m-1-506057/ alebo ak si prajete vyslovene na 3/4 Total Filter, tak je možné s týmto spojiť: https://www.atria.sk/zverne-srobenie-26-x-3-alu-m-3-4-501084/ Pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.