Eshop roka 2025 s vykurovacou technikou

Pusher fitting for copper pipes - 12x1-EK IVAR.TR 4430

Mã số: 500157
Chưa được đánh giá Chi tiết đánh giá
3,79 € –20 %
Vykurovacia technika Zverné šróbenie - na medené potrubie - 12x1-EK
3,79 € –20 % 3,03 € / Cái 2,46 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (46 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Puserrusliitin - IVAR.TR 4430, sopimus: 12 x 1 - EK, pakkaus: 40 kpl pussiin / 320 kpl laatikkoon

 

  • PN 10, T = +120 °C
  • Eurokónus (EK)-kierre
  • käyttö Cu- ja IVAR.C-STEEL-putkille
  • materiaali messinki CW617N, O-rengas - EPDM
  • kiinnitysmomentti 35 - 45 Nm Cu-putkistoille
  • kiinnitysmomentti 40 - 50 Nm IVAR.C-STEEL-putkistoille

 

Oikean asennuksen ohjeet:

1. Asenna puserrusliitin järjestyksessä ja suunnassa kuten seuraavissa kuvissa on esitetty.

IVAR-ohje puristusliittimille

2. Aseta putki ja sopiva EPDM-tiiviste liittimeen ja varmista, että kaikki on puhdasta ja tiivisteen O-rengas ei ole vaurioitunut.

3. Aseta mutteri kierteelle ja kiristä käsin, lopullinen kiristys tehdään sopivan kokoisella avaimella AC 670 / AC 671

Kumiosat eivät saa missään tapauksessa voidella mineraaliöljyillä, EPDM-materiaalille tulee käyttää ainoastaan silikonipohjaista voiteluainetta.

Usein kysyttyä

  • Miten valitsen oikean kokoisen liittimen? Kierreruuvin koko on oltava täsmälleen sama kuin putken tai varusteen, johon liitin kiinnitetään - lyhenteet FF (sisä-sisä) ja MF (ulko-sisä) nimessä ilmoittavat kierteen tyypin eri puolilla.
  • Onko tiivisteainetta tarvittu asennuksessa? Kierteitetyissä liitoksissa käytetään yleensä tefloniteippiä tai hamppukangasta tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaiset kierteitetyt liitokset onnistuvat myös kotona, mutta jos joudutaan koskemaan jo toimivaan putkistoon (erityisesti kaasuputkistoon), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: Puserrusliitin kupariputkille
Bảo hành: 2 năm
Trọng lượng: 0.04 kg
Liittimen tyyppi: liitin (kierreliitos)
Putken halkaisija: 12 mm
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:04:25

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

V avatar của tác giả 14.01.2022 15:32
dobry den mam jeden problem potreboval by som prepojit medenu ruru z 12priemerom z rozvodov od radiatorov do zozdelovaca ktory ma ventile na PEX 16 mozte my poradit za odpoved vam pekne dakujem
A avatar của tác giả 14.01.2022 15:32
Dobrý deň, každý rozdeľovač je ukončený EK vývodom, takže tam môžete priamo napojiť https://www.atria.sk/zverne-srobenie-na-medene-potrubie-12-x-1-ek-500157/ Pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.