Eshop roka 2025 s vykurovacou technikou

Puristusrengas - 20/2 IVAR.O PPSU7 IC

Mã số: PPSU7RV
Chưa được đánh giá Chi tiết đánh giá
1,86 € –19 %
Vykurovacia technika Lisovacia obímka - 20/2
1,86 € –19 % 1,49 € / Cái 1,21 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Puristusrengas - 20/2

  • PN 10, T = +95 °C
  • IVARCLIMA-säteilykattolämmityksen/-jäähdytyksen puristusliittimille
  • materiaali teräs, PPSU

Usein kysytyt kysymykset

  • Miten varmistan, että tämä tuote sopii järjestelmääni? Vertaa kuvauksessa ilmoitettua kokoa, materiaalia ja teknisiä tietoja oman järjestelmäsi vaatimuksiin. Epäselvissä tapauksissa ota meihin yhteyttä ja kuvaile kytkentäsi tarkasti.
  • Pitääkö asennuksen tehdä ammattilaisen? Yksinkertaisten osien asennuksen osaa myös taitava kotimestari, mutta kaasu-, sähkö- tai paineputkistoihin puuttuessa suosittelemme aina ammattiasentajaa.

Các thông số bổ sung

Danh mục hàng: PRESS putkiosat ja venttiilit
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 01.09.2025 0:02:20

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

K avatar của tác giả 31.10.2026 16:56
Czy ta obejma 20/2 nadaje się do systemu IVARCLIMA przy ogrzewaniu podłogowym, czy jest też do chłodzenia, bo mam instalację łączoną?
A avatar của tác giả 31.10.2026 16:56
Tak, ta obejma jest przewidziana zarówno do ogrzewania, jak i chłodzenia podłogowego w systemie IVARCLIMA - w specyfikacji jest to wprost podane. Pracuje przy PN 10 i temperaturze do +95°C, więc spokojnie obsłuży instalację łączoną. Wykonana jest ze stali i PPSU, więc materiałowo też jest do tego dopasowana.
H avatar của tác giả 16.10.2026 11:45
Van nekem egy mennyezeti fűtéses rendszerem, és nem tudom megítélni, hogy ez a karmantú odaillik-e. Milyen anyagból van, mert félek, hogy a meleg víztől tönkremegy idővel?
A avatar của tác giả 16.10.2026 11:45
Ez a karmantú kifejezetten az IVARCLIMA sugárzó mennyezeti fűtés / hűtés préselt szerelvényeihez készült, szóval ha ilyen rendszere van, jó helyen jár. Anyaga acél és PPSU, bírja a PN 10 nyomást és akár 95°C-os hőmérsékletet is, úgyhogy a melegtől nem kell tartania. Ha mégis bizonytalan a bekötést illetően, írja meg nekünk a rendszer pontos leírását, és segítünk kiválasztani a megfelelőt.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.