Eshop roka 2025 s vykurovacou technikou

Sarja puserrusliitin - monikerroksiselle ALPEX-putkelle - 32x3 - 1"M IVAR.RA 761

Mã số: 500203
Chưa được đánh giá Chi tiết đánh giá
21,53 € –20 %
Vykurovacia technika Sada zverného šróbenia so vsuvkou - na viacvrstvové potrubie ALPEX - 32x3 - 1"M
21,53 € –20 % 17,22 € / Cái 14 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (15 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Puserrusliitin puserruksella, IVAR.RA 761, koko: 32 x 3 - 1" M, pakkaus: 10 kpl pussiin / 80 kpl laatikossa
- monikerroksiselle ALPEX-putkelle

 

Usein kysyttyä

  • Miten valita oikea kokoinen putkiosa? Kierreruuvin mitta on täsmättävä putken tai laipan kierrehalkaisijan kanssa, johon liitososa kiinnitetään - lyhenteet FF (sisä-sisä) ja MF (ulko-sisä) nimikkeessä kertovat kierretyypin kummallakin puolella.
  • Onko tiivisteaine tarpeen asennuksessa? Kyllä, kierreliitoksiin käytetään standardisti teflonnauhaa tai hamppukuitua tiivistyspastaa käyttäen, jotta varmistetaan täydellinen tiiveys.
  • Onko asennus ammattilaisen tehtävä? Yksinkertaisen kierreliitoksen pystyy tekemään myös kotikeittäjä perustaidoilla, mutta jos tehdään toimivaan putkistoon (erityisesti kaasuputki), suosittelemme ottamaan yhteyttä putkimieheen, joka myös tarkistaa tiiveyden.

Các thông số bổ sung

Danh mục hàng: Puserrusliittimen sarja supistussovittimella - alpex-monikerroksiselle putkelle
Bảo hành: 2 năm
Trọng lượng: 0.259 kg
Liittimen tyyppi: liitin (kierreliitos)
Putken halkaisija: 32 mm
Kierteen koko: 1"
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:04:19

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

Є avatar của tác giả 17.11.2026 20:15
Підключаю трубу Alpex до колектора з зовнішньою різьбою 1 дюйм, чи цей фітинг підійде і чи потрібно щось додатково ущільнювати на різьбі?
A avatar của tác giả 17.11.2026 20:15
Так, цей фітинг якраз під трубу 32x3 з зовнішньою різьбою 1" M, тому до колектора з такою різьбою підключите без перехідників. На різьбове з'єднання все одно варто докласти тефлонову стрічку або коноплю з пастою — ущільнювальні кільця EPDM в комплекті герметизують саме з'єднання з трубою, а на різьбі потрібен окремий ущільнювач.
R avatar của tác giả 17.09.2026 08:10
Ahoj, kúpil som si toto šróbenie na rúrku 32x3 ale neviem či to zvládnem zamonžovať sám doma bez nejakého špeciálneho náradia, alebo to musí robiť odborník?
A avatar của tác giả 17.09.2026 08:10
Ahoj, toto zverné šróbenie nevyžaduje žiadne zváranie ani lisovanie, takže pri troške šikovnosti to zvládnete aj sami – stačí bežné kľúče. Dôležité je dodržať správny postup montáže, aby spoj dobre utesnil. Ak budete niečo potrebovať, pokojne nás kontaktujte.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.