Eshop roka 2025 s vykurovacou technikou

Puolitiivisteinen sulkuventtiili kaasu - nikkelipinnoitettu valurauta; NBR - DN 100; L=52mm BRA.J9.101 GAS

Mã số: J9.101.100
Chưa được đánh giá Chi tiết đánh giá
191,88 € –20 %
Vykurovacia technika Medziprírubová uzatváracia klapka plyn - disk nikel. liatina; NBR - DN 100; L=52mm
191,88 € –20 % 153,50 € / Cái 124,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Putkikaulusliitosventtiili KAASU, BRA.J9.101 GAS, koko: DN 100, pituus: 52 mm

 

  • max. paine 16 bar, laippa PN16/PN10/PN6 standardin STN EN 1092-1 mukaan
  • T = -10 °C - +70 °C
  • kaasujen luokan G1 mukaan PED 2014/68/EU, paineilma
  • materiaali: runko - valurauta GJS 400-15, levy - nikkelöity valurauta
  • tiiviste/liner materiaali: NBR
  • ei sovellu höyryyn

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille/laitteelle? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T) teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on vastattava putken halkaisijaa.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotimestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina asiantuntijaa, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: BRA.J9.101 GAS - läppäventtiilit KAASU
Bảo hành: 2 năm
Trọng lượng: 4.2 kg
Nimellishalkaisija (DN): DN 100
Venttiilin tyyppi: sulkuläppä
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:09:51

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

V avatar của tác giả 09.11.2026 09:53
Buenos días, mi padre quiere poner esto en una tubería de gas de la cocina y no sabemos si vale para eso o si hay que llamar a alguien especial para montarla. ¿Esta válvula de cierre se puede instalar sin ser profesional?
A avatar của tác giả 09.11.2026 09:53
Hola Víctor, esta válvula es de tipo cierre simple (no es reguladora ni de seguridad), así que según nuestra ficha técnica el montaje lo puede hacer también un aficionado con algo de maña. Aun así, al tratarse de gas, siempre es buena idea que alguien revise después que las bridas quedan bien apretadas y sin fugas. Recuerda comprobar que el diámetro DN 100 y las bridas PN16/PN10/PN6 encajan con tu instalación antes de comprarla.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.