Eshop roka 2025 s vykurovacou technikou

PRESS-siirtoliitin - hattumutteri EK - EKx18 IVAR.PT 5705

Mã số: 513020
Chưa được đánh giá Chi tiết đánh giá
9,03 € –20 %
Vykurovacia technika Prechodka PRESS  - prevlečná matica EK - EKx18
9,03 € –20 % 7,22 € / Cái 5,87 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

PRESS-siirtoliitin - hattumutteri EK, IVAR.PT 5705, koko: EK x 18, pakkaus: 5 kpl pussissa / 230 kpl koko laatikossa

 

  • PN 10, T = +120 °C
  • hattumutterilla ALPEX-putken liittämiseen lämmitysventtiileihin ja putkiosiin
    joissa on Eurokonus (EK) -liitäntäkierre
  • materiaali nikkelöity messinki CW617N, holkki ruostumaton teräs, tiiviste EPDM
  • yhteensopiva B-F-TH-tyypin puristusleukojen kanssa

Usein kysytyt kysymykset

  • Mitä työkaluja tämän putkiosan asennukseen tarvitaan? Puristusliittimet (press) vaativat erikoispuristuspihdit, joissa on oikeantyyppiset leuat (yleensä merkitty B, F tai TH järjestelmän mukaan) putkiosan kokoon ja tyyppiin sopivina - ilman oikeita työkaluja liitosta ei voi tehdä eikä tarkastaa.
  • Mistä tiedän, että liitos on puristettu oikein? Laadukkaissa press-putkiosissa on puristusilmaisin (esim. tiivistävä O-rengas, joka vuotaa, jos puristus on jäänyt kesken) - ennen seinään tai lattiatasoitteeseen valamista koko järjestelmälle on aina tehtävä painekoe.
  • Voiko liitoksen purkaa puristuksen jälkeen? Ei, toisin kuin ruuvattava (puserrusliitin) liitos puristettu liitos on pysyvä, ja sen purkaminen edellyttää putkiosan katkaisemista ja vaihtamista uuteen.
  • Pitääkö asennuksen tehdä ammattilaisen? Kyllä, putkiosien puristaminen vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme tilaamaan asennuksen LVI-asentajalta, erityisesti liitoksissa, jotka valetaan seinään tai lattiatasoitteeseen eikä niitä voi myöhemmin tarkastaa.

Các thông số bổ sung

Danh mục hàng: Suorat PRESS-liittimet, kierretappo EK
Bảo hành: 2 năm
Trọng lượng: 0.09 kg
Liittimen tyyppi: siirtymäkappale
Putken halkaisija: 18 mm
Liitäntätyyppi: puristusliitos
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:05:57

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 02.11.2026 18:00
Imam Alpex cijev koju spajam na radijatorsku armaturu s Eurokonus navojem - odgovara li EKx18 brtva EPDM za grijanje na +120°C bez propuštanja, ili trebam drugi tip brtve za tu temperaturu?
A avatar của tác giả 02.11.2026 18:00
EPDM brtva ugrađena u ovaj fitinz predviđena je baš za takve uvjete, radna temperatura je do +120°C i tlak PN 10, tako da za standardni grijaći sustav nema problema. Samo pazi da stiskanje izvršiš s pravim čeljustima (B, F ili TH tip) jer o tome ovisi brtvljenje, ne samo o samoj brtvi. Nakon montaže obavezno napravi tlak test prije zatvaranja zida ili poda.
M avatar của tác giả 10.09.2026 13:25
Táto prechodka EKx18 – pasuje priamo na press fitting systém bez akýchkoľvek redukovaní?
A avatar của tác giả 10.09.2026 13:25
Áno, prechodka je určená priamo pre press fitting systém EK s rozmerom 18mm, takže žiadne redukcie nepotrebujete. Prevlečná matica umožňuje priame napojenie na príslušné potrubie. Ak si nie ste istý kompatibilitou s vaším konkrétnym systémom, napíšte nám aký máte rozvod a radi skontrolujeme.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.