Eshop roka 2025 s vykurovacou technikou

PRESS-liitin - kupari - Cu 22x26 IVAR.PT 5702

Mã số: 510067
Chưa được đánh giá Chi tiết đánh giá
19,68 € –20 %
Vykurovacia technika Vsuvka PRESS  - meď - Cu 22x26
19,68 € –20 % 15,74 € / Cái 12,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

PRESS-liitin - kupari, IVAR.PT 5702, koko: 22 x 26, pakkaus: 5 pussia / 100 koko laatikko 

 

Usein kysyttyä

  • Mitä työkaluja tarvitsen liitososan asennukseen? Press-liitokset vaativat erikoistuneet puristuspuristimet oikean tyyppisellä leualla (yleensä merkitty B, F tai TH järjestelmän mukaan) vastaavalle koolle ja tyypille - ilman oikeaa työkalua liitosta ei voi muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat press-liitokset sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina tehtävä järjestelmän paineenkestävyystesti.
  • Voiko liitoksen purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitännässä, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, puristusliitosten asennus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysasentajalle, varsinkin liitoksille, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: Suoraliittimet PRESS - kupari
Bảo hành: 2 năm
Trọng lượng: 0.153 kg
Liittimen tyyppi: nippa
Putken halkaisija: 22 mm, 26 mm
Materiaali: kupari / pronssi
Liitäntätyyppi: puristusliitos
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:07:03

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

L avatar của tác giả 02.09.2026 07:24
Hi, our plumber said we need a press fitting to connect 22mm copper pipe to a 26mm section in our heating system. Is this the right part for that, or are we looking at the wrong thing?
A avatar của tác giả 02.09.2026 07:24
Yes, that's exactly what this fitting is for – it connects a 22mm copper pipe on one side to a 26mm on the other, using the press (crimp) method. So no soldering needed, which makes the job quicker and cleaner. Just make sure your plumber has a press tool that works with copper press fittings in these sizes.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.