Eshop roka 2025 s vykurovacou technikou

Press-GAS adapter - ulkoinen kierre - 1/2Mx20 IVAR.PT 5608-GAS

Mã số: 510002GAS
Chưa được đánh giá Chi tiết đánh giá
7,95 € –20 %
Vykurovacia technika Prechodka PRESS-GAS  - závit vonkajší - 1/2Mx20
7,95 € –20 % 6,36 € / Cái 5,17 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (20 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

PRESS-GAS-liitin, IVAR.PT 5608-GAS, koko: 1/2" M x 20, pakkaus: 5 pussia / 200 laatikkoon
- ulkoinen kierre
 
  • maksimipaine PN 10, T = -20 °C - +60 °C
  • maksimikäyttöpaine PN 5
  • ALPEX-GAS-putken liittämiseen sisäiseen kierre
  • materiaali messinki CW617N, tiiviste HNBR
  • yhteensopiva leukatyyppien B kanssa

 

Suositeltu käyttö PTN 704 05 mukaan

 
 

Usein kysyttyä

  • Mitä työkaluja tarvitsen liittimen asennukseen? Press-liittimet vaativat erikoistuneet puristusvasarat oikean tyyppisellä leualla (yleensä merkitty B, F tai TH järjestelmästä riippuen) sopivalle koolle ja tyypille - ilman oikeaa työkalua liitosta ei voida muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkailla press-liittimillä on puristusindikaattori (esim. tiiviste O-rengas, joka vuotaa epätäydellisessä puristuksessa) - ennen upotusta seinään tai laastiin on aina tehtävä paineentarkistus koko järjestelmässä.
  • Voiko liitoksen purkaa sen jälkeen kun se on puristettu? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen edellyttää liittimen leikkaamista ja korvaamista uudella.
  • Onko asennuksen oltava ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroidun työkalun - suosittelemme antamaan lämmitysteknikon/putkimiehen tehtäväksi, erityisesti liitoksissa, jotka upotetaan seinään tai laastiin ilman myöhempää tarkastusmahdollisuutta.

Các thông số bổ sung

Danh mục hàng: IVAR.PT 5608-GAS - siirtoliittimet - ulkokierre
Bảo hành: 2 năm
Trọng lượng: 0.064 kg
Kierteen koko: 1/2"
Tuotteen tyyppi: PRESS-liitin
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:07:46

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

B avatar của tác giả 08.11.2026 21:29
Can I use this fitting to connect ALPEX-GAS pipe to a gas appliance with a 1/2" internal thread, and what's the maximum pressure it's rated for on the gas side?
A avatar của tác giả 08.11.2026 21:29
Yes, this fitting is designed exactly for that - connecting ALPEX-GAS pipe to a component with 1/2" internal thread. On the press/pipe side the max operating pressure is PN 5, while the threaded brass body itself is rated up to PN 10. Just make sure you're crimping with type B jaws, and remember installation should be done by a qualified professional since it's a permanent, non-dismountable joint.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.