Eshop roka 2025 s vykurovacou technikou

Press-GAS 90° - ulkoinen kierteitys - 1" M x 32 IVAR.PT 5711-GAS

Mã số: 511013GAS
Chưa được đánh giá Chi tiết đánh giá
24,72 € –19 %
Vykurovacia technika Koleno PRESS-GAS 90°  - závit vonkajší - 1"Mx32
24,72 € –19 % 19,78 € / Cái 16,08 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.PT 5711-GAS Press-Gas -liitos 90°, IVAR.PT 5711-GAS, koko: 1" M x 32, pakkaus: 5 pussissa / 50 koko laatikossa
- ulkoinen kierre
 
  • maksimipaine PN 10, T = -20 °C - +60 °C
  • maksimikäyttöpaine PN 5
  • ALPEX-GAS -putken sisäiselle kierteelle
  • materiaali messinki CW617N, tiiviste HNBR
  • yhteensopiva B-tyypin leukojen kanssa

 

Suositeltu käyttö PTN 704 05 mukaan

Usein kysytyt kysymykset

  • Mitä työkaluja tarvitsen tämän liittimen asentamiseen? Press-liittimet vaativat erikoistuneet puristustyökalut oikean tyyppisillä leuoilla (yleensä merkitty B, F tai TH järjestelmän mukaan) sopivalle koolle ja tyypille - ilman oikeita työkaluja liitos ei ole mahdollista tehdä eikä tarkistaa.
  • Kuinka tiedän, että liitos on tehty oikein? Laadukkailla press-liittimillä on puristusindikaattori (esim. tiiviste O-rengasti, joka vuotaa epätäydellisen puristuksen yhteydessä) - ennen upotusta seinään tai tasoitukseen on aina tehtävä paineentarkastus koko järjestelmälle.
  • Voidaanko liitos avata sen jälkeen kun se on puristettu? Ei, toisin kuin puristusliitos, puristettu liitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroidut työkalut - suosittelemme antamaan lämmitysasentajalle, varsinkin liitoksille, jotka upotetaan seinään tai tasoitukseen ilman myöhempää tarkastusmahdollisuutta.

Các thông số bổ sung

Danh mục hàng: IVAR.PT 5711-GAS - polvenet - ulkokierre
Bảo hành: 2 năm
Trọng lượng: 0.24 kg
Kierteen koko: 1"
Tuotteen tyyppi: PRESS-liitin
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:07:05

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 29.10.2026 13:32
Can I use this to connect ALPEX-GAS pipe straight to a gas regulator with 1" internal thread, or do I need extra adapters? Also what jaws does the pressing pliers need - B or something else?
A avatar của tác giả 29.10.2026 13:32
Yes, this elbow is made exactly for that - it has a 1" male thread on one side for connecting to your regulator's internal thread, and presses onto 32mm ALPEX-GAS pipe on the other, no extra adapter needed. For pressing you need type B jaws. Keep in mind this is rated for max operating pressure PN 5 on the gas pipe side, and installation should be done by a qualified fitter since it's a permanent press joint.
R avatar của tác giả 23.09.2026 13:05
Chcem použiť toto koleno na rozvod plynu, ale neviem, či závit 1"M pasuje priamo na štandardné plynové rúrky, ktoré mám doma – potrebujem to vedieť pred objednaním.
A avatar của tác giả 23.09.2026 13:05
Áno, vonkajší závit 1" je štandardný rozmer, ktorý sa bežne používa na plynových rozvodoch. Koleno je určené pre press (lisované) spoje, takže na strane 32 budete potrebovať vhodnú press spojku a lisovací nástroj – to nie je klasická závitová montáž. Ak si nie ste istý kompatibilitou s vaším systémom, odporúčame to pred kúpou konzultovať s montážnikom.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.