Eshop roka 2025 s vykurovacou technikou

Press-GAS 90° - sisäpihvi - 1"Fx32 IVAR.PT 5712-GAS

Mã số: 511014GAS
Chưa được đánh giá Chi tiết đánh giá
22,88 € –20 %
Vykurovacia technika Koleno PRESS-GAS 90°  - závit vnútorný - 1"Fx32
22,88 € –20 % 18,30 € / Cái 14,88 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

PRESS-GAS mutteri 90°, IVAR.PT 5712-GAS, koko: 1” F x 32, pakkaus: 5 pussia / 70 koko laatikkoon
- sisäinen kierre
 
  • maksimipaine PN 10, T = -20 °C – +60 °C
  • maksimitoimintapainetta PN 5
  • ALPEX-GAS putken liittämiseen ulkoiselle kierre
  • materiaali messinki CW617N, tiiviste HNBR
  • yhteensopiva B-tyypin puristimien kanssa

 

Suositeltu käyttö PTN 704 05 mukaan

Usein kysyttyä

  • Mitä työkaluja tarvitsen tämän liittimen asennukseen? Pressiliittimet vaativat erikoistyökalun oikealla tyypillä (yleensä B, F tai TH järjestelmän mukaan) sopivan koon ja tyypin liittimeen - ilman oikeaa työkalua liitos ei ole mahdollista tehdä tai tarkistaa.
  • Mistä tiedän, että liitos on oikein puristettu? Laadukkaat pressiliittimet on varustettu puristusindikaattorilla (esim. tiiviste O-rengas, joka vuotaa epätäydellisellä puristuksella) - ennen kuin liitetään seinään tai laastiin, on aina tehtävä paineentarkastus koko järjestelmälle.
  • Voiko liitos avata sen jälkeen, kun se on puristettu? Ei, toisin kuin ruuviliitos (puserrusliitin), puristusliitos on pysyvä ja sen avaaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Onko ammattilainen välttämätön asennukseen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmittimen/asentajan tehtäväksi, erityisesti liitoksille, jotka tulevat upotetuiksi seinään tai laastiin ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: IVAR.PT 5712-GAS - polvenet - sisäkierre
Bảo hành: 2 năm
Trọng lượng: 0.243 kg
Kierteen koko: 1"
Tuotteen tyyppi: PRESS-liitin
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:08:12

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

K avatar của tác giả 07.11.2026 17:18
Hallo, ich soll für die Heizungsanlage meines Vaters einen Eckbogen suchen. Passt der hier wirklich an unsere Alpex-Gas-Rohre und muss ich dafür unbedingt eine spezielle Presszange vom Typ B haben?
A avatar của tác giả 07.11.2026 17:18
Ja, das Fitting ist speziell für den Anschluss von ALPEX-GAS-Rohren ausgelegt. Für die Montage benötigen Sie zwingend eine Presszange mit dem passenden Klemmtyp B, da die Verbindung sonst nicht dicht sitzt. Wir empfehlen daher, diese Arbeit einem Fachmann zu überlassen, damit alles sicher funktioniert.
J avatar của tác giả 03.10.2026 09:33
I'm trying to connect a 32mm ALPEX-GAS pipe to an external thread, but I need to know if this brass fitting (1" F x 32) works with standard type B pressing jaws and if it can handle the pressure for our heating system.
A avatar của tác giả 03.10.2026 09:33
Yes, this IVAR.PT 5712-GAS elbow is made of brass CW617N and specifically works with type B jaws for pressing the joint. It supports a maximum operating pressure of PN 5, which is suitable for connecting your ALPEX-GAS pipe, though you'll definitely need a professional to ensure the press is perfect before hiding it in the wall.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.