Eshop roka 2025 s vykurovacou technikou

Press 90° Elbow - Internal Thread - 3/4"Fx26 IVAR.PT 5712

Mã số: 511008
Chưa được đánh giá Chi tiết đánh giá
11,55 € –20 %
Vykurovacia technika Koleno PRESS 90°  - závit vnútorný - 3/4"Fx26
11,55 € –20 % 9,24 € / Cái 7,51 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (33 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

90° press-kyynärpää sisäpuolinen kierre, IVAR.PT 5712, koko: 3/4" F x 26, pakkaus: 5 pussia / 100 koko pakkaus 

 

Usein kysyttyä

  • Mitä työkaluja tarvitsen liitososan asennukseen? Press-liitokset vaativat erikoistyökaluja, joissa on oikean tyyppinen leuka (yleensä merkitty B, F tai TH järjestelmän mukaan) sopivan koon ja tyypin mukaan - ilman oikeaa työkalua liitosta ei voi tehdä eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaissa press-liitoksissa on puristusindikaattori (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina tehtävä paineentarkistus koko järjestelmässä.
  • Voiko liitoksen purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, puristusliitosten asentaminen vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysasentajalle, varsinkin liitoksissa, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: 90° press-kulma - sisäkierre
Bảo hành: 2 năm
Trọng lượng: 0.139 kg
Liittimen tyyppi: kaari / mutka
Putken halkaisija: 26 mm
Liitäntätyyppi: puristusliitos
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 0:59:56

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

T avatar của tác giả 12.11.2026 17:52
Czy kształtka o wymiarze 3/4" F x 26 jest kompatybilna z rurami ALPEX i czy do jej prawidłowego zamontowania wymagane są kleszcze lisujące ze szczękami typu B, F lub TH?
A avatar của tác giả 12.11.2026 17:52
Tak, ten kolektor PRESS 90° został zaprojektowany specjalnie do łączenia rur ALPEX z rurką zewnętrzną. Do wykonania trwałego połączenia niezbędne jest użycie dedykowanych kleszczy lisujących wyposażonych w odpowiednie szczęki (oznaczone jako B, F lub TH), które muszą być dopasowane do konkretnego wymiaru kształtki. Pamiętajmy, że po zaliszeniu połączenie jest trwałe i nie można go rozmontować bez uszkodzenia elementu.
A avatar của tác giả 26.10.2026 17:40
Ich brauche das Press-Fitting 3/4" F x 26 für den Anschluss einer ALPEX-Leitung an ein Außengewinde, aber ich bin mir nicht sicher, ob die Standard-Presszange mit Klemmen vom Typ B ausreicht oder ob ich zwingend einen anderen Typ benötige.
A avatar của tác giả 26.10.2026 17:40
Für diese Verbindung benötigen Sie eine spezialisierte Presszange, deren Klemmenart (B, F oder TH) exakt auf das Maß und den Typ des Fittings abgestimmt sein muss. Ohne das passende Werkzeug lässt sich die dauerhafte Verbindung weder herstellen noch überprüfen, daher sollten Sie unbedingt Ihr bestehendes Werkzeug prüfen oder Ihren Installateur konsultieren.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.