Eshop roka 2025 s vykurovacou technikou

PERFECTA - 3/4" FF; butterfly ball valve FIV.8366

Mã số: 8366R005
Chưa được đánh giá Chi tiết đánh giá
13,16 € –19 %
Vykurovacia technika Guľový uzáver voda PERFECTA - 3/4"FF; motýľ
13,16 € –19 % 10,53 € / Cái 8,56 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (11 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

PERFECTA-palloventtiili vesiin, FIV.8366, koko: 3/4" FF, pakkaus: 24 kpl pussiin / 96 kpl laatikkoon

 
  • PN 40
  • T = -20 °C - +120 °C
  • sisäinen kierteitys – sisäinen FF, perhonen muotoilu
  • materiaali nikkelöity messinki CW617N
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysytyt kysymykset

  • Miten valita oikea tyyppi ja koko venttiilille/venttiilille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmän todelliset käyttöolosuhteet, ja liitoskoko on vastattava putken halkaisijaa.
  • Miten tämä venttiili/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotimestari, mutta säätö- ja turvaventtiileiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: Sisä-sisäiset perhosventtiilit
Bảo hành: 2 năm
Trọng lượng: 0.202 kg
Venttiilin tyyppi: palloventtiili / pallohana
Kierteen koko: 3/4"
Liitäntätyyppi: sisäkierre
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:12:01

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 29.10.2026 15:13
A 3/4-es méretet a csőre kell mérnem, vagy a menetre? És a nikkelezett sárgaréz (CW617N) tényleg ivóvízhez alkalmas?
A avatar của tác giả 29.10.2026 15:13
A menetet kell mérni, ez egy belső-belső pillangófogantyús, tehát mindkét végén férfi menet (FF). Az anyag CW617N sárgaréz és van rá ivóvíz tanúsítvány, így nyugodtan használható ivóvíz rendszerben.
M avatar của tác giả 27.08.2026 14:49
Je tento uzáver vhodný na priamu montáž na radiátor alebo len na potrubie? Potrebujem uzatvárať prívod vody k radiátoru.
A avatar của tác giả 27.08.2026 14:49
Tento guľový uzáver je určený primárne na inštaláciu na potrubie, nie priamo na radiátor. Na uzatváranie prívodu k radiátoru by bol vhodnejší rohový alebo priamy radiátorový ventil. Motýľová páka na tomto uzáveri je praktická na rýchle ručné ovládanie, ale na radiátorové napojenie to nie je štandardné riešenie.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.