Eshop roka 2025 s vykurovacou technikou

Paluuputken asennuspaketti - DN 25 - TARJOUS PAW.REVERZ

Mã số: 34241
Akcia
Chưa được đánh giá Chi tiết đánh giá
105,29 € –46 %
Vykurovacia technika Sada pre obrátenú inštaláciu - DN 25 - akcia
105,29 € –46 % 56,79 € / Cái 46,17 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Paluujohtoinen asennuspaketti - DN 25

  • PN 6, T = +110 °C
  • PAW-kattilamoduulin liittämiseen PAW.MV-horisontaaliseen jakotukkiin DN 25/32
  • materiaali messinki

Usein kysyttyä

  • Mihin tätä mittauspakettia käytetään? Mittaus- ja kattilapaketit mahdollistavat lämmön- tai vedenkulutuksen seurannan (ja asuintilojen osalta myös suhteellisen kustannusjakamisen) tietyssä piirissä tai asunnossa.
  • Pitääkö asennuksen ja lukemisen suorittaa asiantuntija? Kyllä, mittauspaketin asennus ja mahdollinen virallinen tarkastus/kalibrointi (laskutuksellisen mittauksen yhteydessä) on suoritettava henkilöllä, jolla on asianmukainen pätevyys.

Các thông số bổ sung

Danh mục hàng: Käänteisasennussarja
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 27.02.2026 1:07:13

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 22.10.2026 11:27
Hi, ich muss wissen, ob dieser Satz für die umgekehrte Installation wirklich nur für den PAW Kessel und den horizontalen Verteiler passt. Die Spezifikationen sagen DN 25 und Messing, aber stimmt das auch mit meinem alten Verteiler zusammen?
A avatar của tác giả 22.10.2026 11:27
Ja, der Satz ist speziell für den Anschluss des Kesselmoduls PAW an den horizontalen Verteiler PAW.MV in DN 25/32 ausgelegt. Das Material ist Messing und er hält bis +110 °C stand. Bitte beachte, dass die Montage unbedingt durch einen Fachmann erfolgen muss, besonders wenn es um Abrechnung geht.
M avatar của tác giả 12.09.2026 17:06
Mám kotol pripojený cez DN 25 a chcem vyskúšať obrátenú inštaláciu – je táto sada určená priamo na tento účel, alebo potrebujem k nej ešte nejaké ďalšie komponenty?
A avatar của tác giả 12.09.2026 17:06
Áno, sada je určená práve pre obrátenú inštaláciu na DN 25, takže by mala byť priamo pre váš prípad. Záleží ale aj na konkrétnom type kotla a rozvodu – odporúčam sa pred objednávkou poradiť s nami, či nepotrebujete doplniť niečo navyše. Môžeme spoločne prejsť, čo máte doma, a uistiť sa, že sada pokryje všetko potrebné.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.