Eshop roka 2025 s vykurovacou technikou

Palloventtiili laippaliitos - sarja B2.1 pallo ja varsi ruostumaton - DN 80; L=180mm BRA.B2.111

Mã số: B2111080
Chưa được đánh giá Chi tiết đánh giá
660,51 € –20 %
Vykurovacia technika Guľový uzáver prírubový - séria B2.1 guľa a driek nerez - DN 80; L=180mm
660,51 € –20 % 528,41 € / Cái 429,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Palloventtiili - palloventtiili ja varsi ruostumaton, BRA.B2.111, koko: DN 80, pituus: 180 mm
 
  • max. paine 16 bar (putkiston päässä max. 10 bar), liittimet PN 16 mukaan STN EN 1092-1
  • T = -10 °C - +100 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot ja paineilma
  • materiaali: runko - valurauta GJS 400-15, pallo ja varsi - ruostumaton teräs AISI 304, 2 x O-rengas - NBR
  • jaetulla rungolla
  • täysvirtaava
  • käytettävä yhdessä käyttölaitteiden kanssa
  • liitäntä ISO 5211 mukaan
  • ei sovellu höyryyn ja virtauksen säätöön
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille/venttiilille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmän todelliset käyttöolosuhteet, ja liitoskoko on vastattava putken halkaisijaa.
  • Miten tämä venttiili/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisemmissa sulkuventtiileissä kotimestari voi tehdä asennuksen, mutta säätö- ja turvaventtiileissä (turvaventtiilit, paineensäätöventtiilit) suosittelemme aina asiantuntijaa, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: BRA.B2.111 - GV B2.111
Bảo hành: 2 năm
Trọng lượng: 15.1 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:06:21

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

B avatar của tác giả 18.11.2026 16:46
Je dois installer cette vanne sur une conduite de vapeur basse pression dans une petite installation collective, est-ce que ce modèle convient ?
A avatar của tác giả 18.11.2026 16:46
Non, cette vanne n'est pas adaptée pour la vapeur, c'est précisé dans les caractéristiques du produit. Elle est prévue pour le chauffage, la climatisation et les réseaux d'eau et d'air sous pression, avec une plage de température de -10°C à +100°C. Pour une application vapeur, il faut vous orienter vers un modèle spécifiquement conçu pour ça, n'hésitez pas à écrire à la boutique si vous avez besoin d'aide pour trouver la bonne référence.
S avatar của tác giả 23.10.2026 20:23
Ich brauche ein Ventil für meine Heizung, das genau DN 80 passt und bis 16 bar Druck aushält. Passt das hier wirklich, oder ist es nur für Wasser gedacht?
A avatar của tác giả 23.10.2026 20:23
Hallo Sebastian, ja, dieser Hahn ist genau für DN 80 ausgelegt und hält bis zu 16 bar Druck aus. Er eignet sich perfekt für Heizungs- und Klimaanlagen sowie für Wasserleitungen, solange die Temperatur zwischen -10 und +100 Grad liegt. Für Dampf oder Trinkwasser solltest du ihn jedoch nicht verwenden.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.