Eshop roka 2025 s vykurovacou technikou

Palloventtiili laippaliitos - sarja B2.1 pallo ja varsi ruostumaton - DN 100; L=190mm BRA.B2.111

Mã số: B2111100
Chưa được đánh giá Chi tiết đánh giá
1 014,75 € –20 %
Vykurovacia technika Guľový uzáver prírubový - séria B2.1 guľa a driek nerez - DN 100; L=190mm
1 014,75 € –20 % 811,80 € / Cái 660 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Palloventtiili - palloventtiili ja varsi ruostumaton teräs, BRA.B2.111, koko: DN 100, pituus: 190 mm
 
  • max. paine 16 bar (putkiston päässä max. 10 bar), liittimet PN 16 mukaan STN EN 1092-1
  • T = -10 °C - +100 °C
  • lämmitys- ja ilmastointijärjestelmät (HVAC), vesijohdot ja paineilma
  • materiaali: runko - valurauta GJS 400-15, pallo ja varsi - ruostumaton teräs AISI 304, 2 x O-rengas - NBR
  • jaetulla rungolla
  • täysvirta
  • käytettävä yhdessä käyttölaitteiden kanssa
  • liitäntä ISO 5211 mukaan
  • ei sovellu höyryyn ja virtauksen säätöön
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Valitse laite/venttiili sen mukaan, että nimellispainetaso (PN) ja käyttölämpötila (T) vastaavat tai ylittävät järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko vastaa putken halkaisijaa.
  • Miten laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus suoritettava asiantuntijan toimesta? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) asennus on aina suositeltavaa antaa asiantuntijalle, koska ne ovat turvallisuustoimintoja.

Các thông số bổ sung

Danh mục hàng: BRA.B2.111 - GV B2.111
Bảo hành: 2 năm
Trọng lượng: 5 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:06:47

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 08.11.2026 13:26
Dá se na tenhle ventil namontovat pneumatický pohon, nebo je jen na ruční ovládání? Chci to řešit na vzduchotechnice.
A avatar của tác giả 08.11.2026 13:26
Dá, má připojení pro pohon podle ISO 5211, takže pneumatický nebo elektropohon jde namontovat bez problému. Jen počítejte, že je to čistě uzavírací armatura, na regulaci průtoku ani na páru se nehodí.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.