Eshop roka 2025 s vykurovacou technikou

Palloventtiili laippaliitännällä - sarja 02, ruostumaton teräs, vesi - DN 65; L=170 mm BRA.02.622

Mã số: I02622065
Chưa được đánh giá Chi tiết đánh giá
1 471,08 € –20 %
Vykurovacia technika Guľový uzáver prírubový - série 02 na vodu nerez - DN 65; L=170mm
1 471,08 € –20 % 1 176,86 € / Cái 956,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Palloventtiili - sarja 02, ruostumaton teräs, DN 65; L=170 mm

  • max. paine 16 bar, laippa PN 16 mukaan STN EN 1092-1
  • T = -25 °C - +150 °C
  • lämmitys- ja ilmastointijärjestelmät (HVAC), vesijohdot, kemianteollisuus
  • runko: ruostumaton teräs A351 CF8M, pallo ja varsi ruostumaton AISI 316
  • tiiviste: pallo PTFE, varsi PTFE ja FKM (Viton®)
  • jaettava runko, täysvirta, käyttö myös käyttövoimilla, liitos ISO 5211 mukaan
  • antistaattinen malli, lukittavalla vivulla
  • ei sovellu höyryyn ja virtauksen säätöön
  • ATEST juomavedelle, RÚVZ Poprad, ATEX EU-asetuksen 2014/34/EU mukaan

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on oltava vähintään todelliset käyttöolosuhteet järjestelmässäsi, ja liitoskoko on oltava putken halkaisijan mukainen.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkulaitteiden asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennus on aina suositeltavaa antaa ammattilaiselle, koska ne ovat turvallisuustoimintoja.

Các thông số bổ sung

Danh mục hàng: BRA.02.622 - GV-sarja 02 - ruostumaton teräs
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:05:52

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 12.11.2026 21:34
Bonjour à vous, je souhaite installer cette vanne DN 65 pour un circuit de chauffage fonctionnant jusqu'à 140 °C et sous une pression de 15 bars ; pouvez-vous me confirmer que le corps en acier inoxydable CF8M et les joints PTFE/FKM sont bien compatibles avec ces conditions de service sans risque ?
A avatar của tác giả 12.11.2026 21:34
Bonjour David, ce modèle est tout à fait adapté car il supporte effectivement des températures allant jusqu'à 150 °C et une pression maximale de 16 bar. Les matériaux spécifiés, notamment l'inox A351 CF8M pour le corps et le Viton® pour certains joints, garantissent la tenue dans votre installation HVAC. Vous pouvez consulter les détails techniques complets sur la fiche produit pour vérifier les normes PN 16 avant commande.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.