Eshop roka 2025 s vykurovacou technikou

Palloventtiili laippaliitännällä - sarja B2.1 juomavedelle - DN 50; L=150 mm BRA.B2.100

Mã số: B2100050
Chưa được đánh giá Chi tiết đánh giá
258,30 € –20 %
Vykurovacia technika Guľový uzáver prírubový - série B2.1 pre pitnú vodu - DN 50; L=150mm
258,30 € –20 % 206,64 € / Cái 168 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Palloventtiili - juomavesovelluksiin, BRA.B2.100, koko: DN 50, pituus: 150 mm
 
  • max. paine 16 bar (putken päässä max. 10 bar), liittimet PN 16 standardin STN EN 1092-1 mukaan
  • T = -10 °C - +100 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohtoihin ja paineilmasovelluksiin
  • materiaali: runko - valurauta - GJS 400-15, pallo - messinki CuTn40Pb2, varsi - messinkipäällystetty messinki, 2 x O-rengas - NBR
  • jaetulla rungolla
  • täysvirtaava
  • käytettävä yhdessä käyttölaitteiden kanssa
  • liitäntä ISO 5211 -standardin mukaan
  • ei sovellu höyryyn ja virtauksen säätöön
  • Juomaveden hyväksyntä

Usein kysyttyä

  • Miten valita oikean tyyppinen ja kokoinen venttiili? Valitse venttiili sen nimellispainon (PN) ja käyttölämpötilan (T) perusteella - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy tuotteen kohdalla yllä.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennus on aina suositeltavaa antaa ammattilaiselle, koska ne ovat turvallisuustoimintoisia elementtejä.

Các thông số bổ sung

Danh mục hàng: BRA.B2.100 - GV B2.100
Bảo hành: 2 năm
Trọng lượng: 9.15 kg
Nimellishalkaisija (DN): DN 50
Venttiilin tyyppi: palloventtiili
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:04:22

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

S avatar của tác giả 06.11.2026 14:06
Tengo una tubería de 50 mm y necesito cerrar el flujo de agua caliente en mi instalación HVAC, ¿esta válvula DN 50 con bridas PN 16 soporta hasta 100 grados y 16 bar sin problemas?
A avatar của tác giả 06.11.2026 14:06
Sí, esta válvula B2.100 está diseñada para aguantar temperaturas de -10 a +100 °C y una presión máxima de 16 bar (o 10 bar si va al final de la línea). El cuerpo es de fundición gris y las bridas cumplen con la norma EN 1092-1, así que encaja perfecto en tu sistema de calefacción o aire acondicionado. Recuerda que no sirve para regular caudal ni usar con vapor, solo para cierre total.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.