Eshop roka 2025 s vykurovacou technikou

Palloventtiili laippaliitännällä - sarja B2.1 juomavedelle - DN 80; L=180mm BRA.B2.100

Mã số: B2100080
Chưa được đánh giá Chi tiết đánh giá
415,74 € –20 %
Vykurovacia technika Guľový uzáver prírubový - série B2.1 pre pitnú vodu - DN 80; L=180mm
415,74 € –20 % 332,59 € / Cái 270,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Palloventtiili - juomavesovelluksiin, BRA.B2.100, koko: DN 80, pituus: 180 mm
 
  • max. paine 16 bar (putkiston päässä max. 10 bar), laippa PN 16 standardin STN EN 1092-1 mukaan
  • T = -10 °C - +100 °C
  • lämmitys- ja ilmastointijärjestelmät (HVAC), vesijohdot ja paineilma
  • materiaali: runko - valurauta - GJS 400-15, pallo - messinki CuTn40Pb2, varsi - messinki, 2 x O-rengas - NBR
  • jaettava runko
  • täysvirta
  • käyttö myös käyttövoimilla
  • liitäntä ISO 5211 mukaan
  • ei sovellu höyryyn ja virtauksen säätöön
  • ATEST juomavedelle

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaisemmissa sulkuventtiileissä kotimestari voi tehdä asennuksen, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: BRA.B2.100 - GV B2.100
Bảo hành: 2 năm
Trọng lượng: 15 kg
Nimellishalkaisija (DN): DN 80
Venttiilin tyyppi: palloventtiili
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:05:51

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 09.10.2026 14:39
Dobrý den, plánuji tento přírubový kulový uzávěr DN 80 použít v systému vytápění s maximální teplotou 95 °C a tlakem 14 barů. Odpovídají mu tyto provozní parametry z vašich specifikací?
A avatar của tác giả 09.10.2026 14:39
Ano, tento ventil je určen pro teploty od -10 do +100 °C a max. tlak 16 bar, takže vaše podmínky splňuje. Tělo je z litiny GJS 400-15 a koule z mosazi, což je běžné řešení pro topné systémy i rozvody vody. Pokud máte další dotazy na montáž nebo rozměry, klidně se zeptejte.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.