Eshop roka 2025 s vykurovacou technikou

Palloventtiili laippaliitännällä - sarja B2.1 öljytuotteille - DN 125; L=200 mm BRA.B2.100 FKM

Mã số: B2100125FKM
Chưa được đánh giá Chi tiết đánh giá
1 122,99 € –20 %
Vykurovacia technika Guľový uzáver prírubový - série B2.1 pre ropné produkty - DN 125; L=200mm
1 122,99 € –20 % 898,39 € / Cái 730,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Tilaustuote (1-2 viikkoa)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Palloventtiili - öljytuotteille, BRA.B2.100 FKM, koko: DN 125, pituus: 200 mm
 
  • max. paine 16 bar (putken päässä max. 10 bar)
  • liitännät PN 16 mukaan STN EN 1092-1
  • T = -10 °C - +150 °C
  • lämmitys- ja ilmastointijärjestelmille (HVAC), vesijohdot ja paineilma
  • materiaali: runko - valurauta GJS 400-15, pallo - messinki CuZn40Pb2, varsi - messinki, kromattu, 2 x O-rengas - FKM (Viton®)
  • jaetulla rungolla
  • täysi virtaus
  • käytettävä yhdessä käyttölaitteiden kanssa
  • liitäntä ISO 5211 mukaan
  • ei sovellu höyryyn ja virtauksen säätöön
  • ATEST juomavedelle, RÚVZ Poprad

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus suoritettava asiantuntijan toimesta? Yksinkertaisempien sulkuventtiilien asennuksen voi tehdä myös kotimestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennuksessa suosittelemme aina asiantuntijaa, koska kyseessä on turvallisuusfunktio.

Các thông số bổ sung

Danh mục hàng: BRA.B2.100 FKM - GV B2.100 FKM
Bảo hành: 2 năm
Trọng lượng: 29.45 kg
Materiaali: runko - valurauta GJS 400-15
Nimellishalkaisija (DN): DN 125
Venttiilin tyyppi: palloventtiili
Rungon materiaali: valurauta
Mäntäispaine: PN 16
Nimelliskujuus: DN 125
Hinnan viimeisin päivitys: 13.04.2026 1:10:13

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

N avatar của tác giả 21.10.2026 16:38
Zaujíma ma, či tento uzáver s dĺžkou 200 mm a PN 16 vydrží pri ropných produktoch teplotu do 150 stupňov a či je vhodný aj pre tlakový vzduch.
A avatar của tác giả 21.10.2026 16:38
Áno, podľa špecifikácií je určený pre ropné produkty v rozsahu -10 až +150 °C a rovnako sa dá použiť aj na rozvody vody a tlakový vzduch. Maximálny tlak je 16 bar, pričom na konci potrubia by mal byť maximálne 10 bar.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.