Eshop roka 2025 s vykurovacou technikou

Palloventtiili laippaliitännällä - sarja B1 - DN 100; L=130 mm BRA.B1.000

Mã số: B100100
Chưa được đánh giá Chi tiết đánh giá
605,16 € –20 %
Vykurovacia technika Guľový uzáver prírubový - série B1 - DN 100; L=130mm
605,16 € –20 % 484,13 € / Cái 393,60 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Palloventtiili, BRA.B1.000, koko: DN 100, pituus: 130 mm, kierteitys: 8 x M16
 
  • maksimipaine 16 bar (putkiston päässä max. 10 bar)
  • PN 16 -liitännät standardin STN EN 1092-1 mukaan
  • T = -10 °C - +100 °C
  • lämmitys- ja ilmastointijärjestelmissä (HVAC), vesijohdoissa ja paineilmanjakelussa
  • materiaali runko: valurauta GJL250, pallo kromattu messinki CuZn40Pb2
  • materiaali tiiviste: pallo PTFE, varsi 2 x NBR
  • yhdysosa, täystehoinen, käyttö myös käyttövoimilla, liitos ISO 5211 mukaan
  • ei sovellu höyryyn ja virtauksen säätöön
  • JUOMAVESIATEST

Usein kysyttyä

  • Miten valita oikea laite/venttiili? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden tulee vastata tai ylittää järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko tulee vastata putken halkaisijaa.
  • Miten laite/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus ammattilaisen tehtävä? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalouden mestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asentamiseen suosittelemme aina ammattilaista, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: BRA.B1.000 - GV sarja B1
Bảo hành: 2 năm
Trọng lượng: 14.25 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:10:16

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

C avatar của tác giả 25.10.2026 14:07
On a un tuyau de 100 mm dans la chaudière, est-ce que cette vanne B1 DN 100 va marcher avec nos raccords PN 16 pour l'eau chaude ?
A avatar của tác giả 25.10.2026 14:07
Oui, c'est tout à fait compatible puisque la vanne est conçue pour le chauffage et l'eau jusqu'à 100°C avec un bridage PN 16. Le corps en fonte GJL250 et les joints PTFE sont faits pour résister à ces conditions sans problème. C'est une vanne de fermeture simple donc tu peux l'installer toi-même si tu es à l'aise avec les outils.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.