Eshop roka 2025 s vykurovacou technikou

Palloventtiili kauko-ohjauksella - FASTEC Quick; DN 15; FF IVAT.T4 E-READY

Mã số: T4P3271100
Chưa được đánh giá Chi tiết đánh giá
61,13 € –20 %
Vykurovacia technika Guľový uzáver s možnosťou vzdialeného ovládania - FASTEC Quick; DN 15; FF
61,13 € –20 % 48,90 € / Cái 39,76 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kaukosäätöinen palloventtiili - DN 15; FASTEC Quick

  • PN 10, T = +95 °C
  • liitäntäjärjestelmä FASTEC® Quick, F 13 DN 15 -kokoon
  • liitäntäjärjestelmä FASTEC® Quick, F 14 DN 20 -kokoon
  • liitäntäkoot 1/2”, 3/4”
  • mahdollisuus ohjata servomoottorilla IVAR.E 104
  • materiaali messinki CW617N, pallo teknopolymeeri, kotelo PS

Usein kysyttyä

  • Miten valita oikea laite- tai venttiilityyppi ja koko? Ohjaa nimellispainetta (PN) ja käyttölämpötilaa (T) teknisistä tiedoista - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitäntäkoon on vastattava putken halkaisijaa.
  • Miten tämä laite tai venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotimestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: Palloaukko etäohjauksella
Bảo hành: 24
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:05:38

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 08.10.2026 08:45
Given that this valve utilizes the FASTEC Quick connection system for DN 15, could you confirm if the CW617N brass housing and technopolymer ball are suitable for a heating circuit operating at +95 °C with a nominal pressure of PN 10?
A avatar của tác giả 08.10.2026 08:45
Yes, those specifications match perfectly as the product is rated for temperatures up to +95 °C and PN 10. The housing is made of CW617N brass with a technopolymer ball, so it will handle your system conditions without issue. You can find more details on compatible actuators like the IVAR.E 104 in our selection of remote control options.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.