Eshop roka 2025 s vykurovacou technikou

Palloventtiili kaasulle - seinään upotettava - TC 3/4" x TC 3/4" IVAR.K2.1

Mã số: K201BC10100
Chưa được đánh giá Chi tiết đánh giá
112,91 € –20 %
Vykurovacia technika Guľový uzáver plyn - podomietkový - TC 3/4" x TC 3/4"
112,91 € –20 % 90,33 € / Cái 73,44 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kupuputki - seinäasennus, IVAR.K2.1, koko: TC 3/4" x TC 3/4", pakkaus: 1 kpl


  • PN 1, T = -20 °C - +60 °C, nimellinen koko DN 15
  • lämpötilankestävyys +650 °C/30 minuuttia
  • kaikentyyppisille kaasuille STN EN 437 ja DVGW G260/1 mukaisesti
  • suunniteltu yksinkertaiseen asennukseen ja kotitalouksien kaasujohtojen turvalliseen käyttöön
  • liitäntäkoko TČ:n sisääntulossa ja ulostulossa 3/4"
  • sisältää asennuskotelon, ilman suojakantta
  • materiaali messinki, muovi
 

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (vesi-, lämmitys-, kaasu-, aurinkoputkistot, paineilma jne.) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - eri materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niille on sertifioitu eri väliaineet.
  • Miten tämä putki liitetään? Tavallisesti puristus- tai hitsausliitoksilla, riippuen järjestelmästä ja halkaisijasta - käytä samaan järjestelmään sopivia liittimiä.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, erityisesti kaasu-, paineilma- tai hitsausliitoksissa asennus on varattu henkilölle, jolla on asianmukainen pätevyys.

Các thông số bổ sung

Danh mục hàng: IVAR.K2.0, K2.1 - uppotettavat pallosulut
Bảo hành: 2 năm
Trọng lượng: 0.653 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:02:16

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

Z avatar của tác giả 13.11.2026 08:17
Czy ten zawór da się zamontować do gazu, bo szukam czegoś podłogowego z przyłączami 3/4 cala?
A avatar của tác giả 13.11.2026 08:17
Tak, ten model IVAR.K2.1 jest dedykowany do domowych instalacji gazowych i ma wymiary TC 3/4" x TC 3/4". Został wykonany z mosiądzu i plastiku, a jego temperatura pracy to od -20 do +60 stopni Celsjusza. Pamiętaj tylko, że przy montażu w instalacjach gazowych musisz zaangażować fachowca z odpowiednimi uprawnieniami.
S avatar của tác giả 26.10.2026 20:22
Hi, ich plane den Einbau eines Unterputz-Kugelhahns für eine Gasleitung und frage mich, ob der Anschluss TC 3/4" x TC 3/4" auch mit meinem bestehenden System passt oder ob ich hier spezielle Fittings brauche?
A avatar của tác giả 26.10.2026 20:22
Der Hahn hat auf beiden Seiten einen TC 3/4"-Anschluss und wird inklusive Montageschacht geliefert. Für die Verbindung sollten Sie unbedingt Fittings desselben Systems verwenden, damit alles sicher sitzt. Da es sich um eine Gasleitung handelt, ist die Montage jedoch nur durch eine fachlich qualifizierte Person erlaubt.
R avatar của tác giả 24.08.2026 09:52
Dobrý deň prajem, montuje sa tento uzáver pred plynomerom alebo za ním, a dá sa použiť na prívod ku kotlu v byte?
A avatar của tác giả 24.08.2026 09:52
Tento uzáver je určený na rozvod plynu a bežne sa montuje za plynomerom, napríklad na prívod ku kotlu. Je podomietkový, takže sa inštaluje do steny – viditeľná zostane len páčka. Montáž plynu musí vždy vykonať oprávnená osoba.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.