Eshop roka 2025 s vykurovacou technikou

Optima kylpyhuonesäätö - kolmiulotteinen - 1/2"xM24; vasen; ruostumaton teräs IVAR.DV 028

Mã số: 530013INOX
Chưa được đánh giá Chi tiết đánh giá
107,13 € –20 %
Vykurovacia technika Kúpeľňové regulačné šróbenie OPTIMA - trojosové - 1/2"xM24; ľavé; inox
107,13 € –20 % 85,70 € / Cái 69,67 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (1 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Optima-sarjan säädyssarja - kolmiakselinen - L, IVAR.DV 028, koko: 1/2" x M 24, ruostumaton teräs

 

  • PN 10, T = +100 °C
  • IVAR.DV 028 - vasen (L)
  • säädettävä liitos, termostaattiventtiili ja säädyssarjat sisältävät termostaattisen insertin
  • materiaali messinki CW617N pintakäsittelyllä

Usein kysyttyä

  • Miten valita oikean tyyppinen ja kokoinen laippa/venttiili? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden tulee vastata tai ylittää järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko tulee vastata putken halkaisijaa.
  • Miten tämä laippa/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalousmestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, säätöventtiilit) kohdalla suosittelemme aina ammattilaista, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: OPTIMA-säätöventtiilit – suorat / kulmaliitännät, kolmiakseliset
Bảo hành: 2 năm
Trọng lượng: 0.387 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:09:54

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 01.11.2026 12:04
Ich hab einen Heizkörperanschluss mit Rohr von unten links und möchte den Regelhahn dort einbauen. Passt bei dieser Ausführung "links" das Gewinde 1/2" x M24 für den Anschluss an einen üblichen Thermostatkopf, und bis zu welcher Temperatur ist das Teil überhaupt freigegeben?
A avatar của tác giả 01.11.2026 12:04
Ja, die Ausführung mit M24 ist der Standardanschluss, auf den gängige Thermostatköpfe passen, und die Einschraube für den Thermostatkopf ist bereits dabei. Der Regelhahn ist für PN 10 und bis 100°C ausgelegt, das deckt normale Heizungsanlagen locker ab. Da es sich um "links" handelt, achten Sie nur darauf, dass die Anschlussrichtung tatsächlich zu Ihrem Heizkörper passt, sonst gibt's die Variante auch als rechts bzw. mittig in der gleichen Serie.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.