Eshop roka 2025 s vykurovacou technikou

Optima ALPEX 16x2mm; ruostumaton teräs IVAR.DF 03

Mã số: 530016INOX
Chưa được đánh giá Chi tiết đánh giá
10,23 € –20 %
Vykurovacia technika Zverné šróbenie OPTIMA - ALPEX 16x2mm; inox
10,23 € –20 % 8,18 € / Cái 6,65 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Puserrusliitin OPTIMA, IVAR.DF 03, koko: ALPEX 16 x 2, ruostumaton teräs

  • PN 10, T = +100 °C
  • sopii OPTIMA kylpyhuonelaitteisiin
  • liitoskoko M 24
  • materiaali messinki CW617N pinnoituksella
  • IVAR.DF 03 - monikerroksinen putki ALPEX
  • kiinnitysmomentti IVAR.DF 03 = 25 - 35 Nm

Usein kysyttyä

  • Miten valitsen oikean tyyppisen ja kokoisen liittimen/venttiilin? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), niiden tulee vastata tai ylittää järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoon tulee vastata putken halkaisijaa.
  • Miten tämä liitin/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisinkytkentä jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotitalousammattilainen, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätimet) kohdalla suosittelemme aina ammattilaista, koska kyseessä ovat turvallisuustoiminnot.

Các thông số bổ sung

Danh mục hàng: OPTIMA lisävarusteet
Bảo hành: 2 năm
Trọng lượng: 0.05 kg
Tyyppi: liitäntäliitin
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:11:54

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

V avatar của tác giả 12.11.2026 12:49
Bună ziua, am o țeavă multistrat ALPEX de 16x2 mm și vreau să știu dacă supapa asta de siguranță se potrivește la ea sau trebuie să caut altceva?
A avatar của tác giả 12.11.2026 12:49
Da, se potrivește perfect, pentru că este specifică exact pentru țevile ALPEX 16 x 2 mm. Materialul din care e făcută este inox, iar presiunea nominală de PN 10 acoperă nevoile normale ale unui sistem de încălzire. Doar ai grijă ca montajul să fie strâns între 25-35 Nm cum scrie în fișă.
T avatar của tác giả 06.10.2026 12:12
Passt die Verzinkung an mein ALPEX 16x2 mm Rohr, wenn ich es direkt an die Badarmatur schraube? Ich brauche das für eine Montage mit dem Anzugmoment von 30 Nm.
A avatar của tác giả 06.10.2026 12:12
Ja, das verzinkte Rohr OPTIMA ist exakt auf den Anschluss M 24 und das ALPEX 16 x 2 mm ausgelegt. Das Material Messing CW617N hält dabei bis +100 °C und Sie können das angegebene Anzugmoment von 25 - 35 Nm sicher nutzen. Für solche Armaturen empfehlen wir aber immer die Hilfe eines Fachmanns, da es sich um Sicherheitskomponenten handelt.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.