Eshop roka 2025 s vykurovacou technikou

Nippu - ruostumaton teräs AISI 316 - 42 mm IVAR.IVN10

Mã số: IVN10.42
Chưa được đánh giá Chi tiết đánh giá
15,13 € –20 %
Vykurovacia technika Nátrubok  - nerez AISI 316 - 42mm
15,13 € –20 % 12,10 € / Cái 9,84 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Näntä - N - 42 mm

  • PN 16, T = -20 °C - +85 °C - max. +120 °C
  • näntä PRESS x PRESS
  • käyttötarkoitus: terveysteknisille asennuksille, sprinklerijärjestelmille,
    lämmitysjärjestelmille, paineilmalle, aurinkojärjestelmille, inerttikaasuille ja teollisuudelle
  • materiaali: ruostumaton teräsluokka Wst. Nr. 1.4404 (AISI 316L), EPDM-tiiviste

Huomio: Tiivistyy huonosti, jos sitä ei puristeta ja siinä on puristusindikaattori halkaisijaltaan 54 mm.

Usein kysytyt kysymykset

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (veden, lämmityksen, kaasun, aurinkojärjestelmien, paineilman jne. jakelujärjestelmät) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - eri materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niillä on erilaiset sertifioidut väliaineet.
  • Miten tämä putki liitetään yhteen? Yleensä puristusliittimillä (press) tai hitsatuilla liitoksilla, järjestelmästä ja halkaisijasta riippuen - käytä yhteensopivia liittimiä samasta järjestelmästä.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, erityisesti kaasun, paineilman tai hitsattujen liitosten asennukset on varattu henkilölle, jolla on asianmukainen ammatillinen pätevyys.

Các thông số bổ sung

Danh mục hàng: IVAR.IVN10,IVN11 - Putkiliitin
Bảo hành: 2 năm
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 26.05.2026 8:48:47

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 30.10.2026 11:43
Zanima me, ali je ta nazobčanec 42 mm primeren za vgradnjo v sprinkler sistem, glede na to, da imam na voljo tlak do 16 barov? Prav tako prosim za potrditev, ali je pri tej velikosti nujno potrebna uporaba indikatorja stiskanja, da bo spoj ustrezen.
A avatar của tác giả 30.10.2026 11:43
Da, ta nazobčanec 42 mm je dimenzioniran na PN 16, kar ustreza vašim zahtevam, poleg tega pa je izrecno naveden tudi med izdelki, primernimi za sprinkler sisteme. Glede indikatorja stiskanja - pri tej velikosti to ni nujno, saj je omenjena zahteva v opombi navedena za dimenzije do 54 mm, kjer je stisk brez indikatorja označen kot neustrezen. Vseeno priporočamo, da montažo izvede usposobljena oseba, še posebej ker gre za sistem, kjer je zanesljivost spoja ključnega pomena.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.