Eshop roka 2025 s vykurovacou technikou

Press Board - End, Heavy - 16x1/2"F IVAR.MP 5760

Mã số: 513001MPHD
Chưa được đánh giá Chi tiết đánh giá
12,55 € –20 %
Vykurovacia technika Nástenka PRESS - koncová, ťažká - 16x1/2"F
12,55 € –20 % 10,04 € / Cái 8,16 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (47 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.MP 5760
 
  • PN 10, T = +120 °C
  • yhteensopiva ALPEX- ja TURATEC-putkien kanssa
  • IVAR.MP 5760 -lisäpään seinäkiinnikkeellä on massiivinen, vahvistettu runko, joka estää halkeilun ammattitaidottoman asennuksen ja liitoskierteen puristamisen yhteydessä
  • materiaali messinki CW617N, holkki ruostumaton teräs, tiiviste EPDM

Usein kysytyt kysymykset

  • Mitä työkaluja tarvitsen liittimen asennukseen? Puristusliittimet vaativat erikoistyökalut, joissa on oikean tyyppinen puristusleuka (yleensä B, F tai TH järjestelmästä riippuen) - ilman oikeita työkaluja liitosta ei voi muodostaa tai tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaissa puristusliittimissä on puristusindikaattori (esim. tiiviste O-rengas, joka vuotaa jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai tasoitteeseen, on aina tehtävä paineentarkistus koko järjestelmässä.
  • Voiko puristusliitoksen purkaa sen jälkeen kun se on tehty? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Onko asennus annettava ammattilaisen tehtäväksi? Kyllä, puristusliittimien asennus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan asennuksen lämmitysasentajalle, erityisesti liitoksissa, jotka upotetaan seinään tai tasoitteeseen ilman mahdollisuutta myöhempään tarkastukseen.

Các thông số bổ sung

Danh mục hàng: Press-liittimet - pääte- ja läpivientiliittimet
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:01:40

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 02.10.2026 19:11
Salut, am și eu o țeavă de aia cu alpex și vreau să o astup cu capacul ăsta la perete, dar nu știu dacă pot să o pun și eu acasă cu un clește normal sau trebuie neapărat chemat cineva? Mi-e teamă să nu curgă apa pe urmă prin perete.
A avatar của tác giả 02.10.2026 19:11
Bună, din păcate nu se poate monta cu un clește obișnuit - acest tip de fiting se presează cu clești speciali, cu gheare potrivite pentru dimensiunea și tipul lui, altfel conexiunea nu se strânge corect. Fiind vorba de o conexiune care rămâne îngropată în perete, recomandăm clar un instalator, pentru că odată presat nu se mai poate desface, iar o greșeală s-ar vedea abia după ce apare scurgerea. Produsul are oricum o garnitură care avertizează dacă presarea nu e completă, dar tot trebuie testată presiunea înainte de a închide peretele.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.