Eshop roka 2025 s vykurovacou technikou

Sarja puserrusliitin - monikerroksinen putki ALPEX - 26x3 - 1"M IVAR.RA 761

Mã số: 506057
Chưa được đánh giá Chi tiết đánh giá
16,36 € –19 %
Vykurovacia technika Sada zverného šróbenia so vsuvkou - na viacvrstvové potrubie ALPEX - 26x3 - 1"M
16,36 € –19 % 13,09 € / Cái 10,64 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (21 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Puserrusliitin IVAR.RA 761, koko: 26 x 3 - 1" M, pakkaus: 15 kpl pussia kohti / 120 kpl laatikossa
- monikerroksiselle ALPEX-putkelle
 

Các thông số bổ sung

Danh mục hàng: Puserrusliittimen sarja supistussovittimella - alpex-monikerroksiselle putkelle
Bảo hành: 2 năm
Trọng lượng: 0.192 kg
Liittimen tyyppi: liitin (kierreliitos)
Putken halkaisija: 26 mm
Kierteen koko: 1"
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:06:22

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

S avatar của tác giả 07.11.2026 21:41
Bok, imam ALPEX cijev debljine 26 i trebam spoj na običan crijevo od inča. Je li ovo rješenje točno za tu dimenziju i može li se koristiti za vodu koja je vruća?
A avatar của tác giả 07.11.2026 21:41
Da, ovaj set je baš napravljen za vašu ALPEX cijev dimenzije 26x3 i ima vanjski navoj od 1 inč koji se slaže s vašim crijevom. Može se sigurno koristiti za toplu vodu jer izdržava temperature do +120 °C. Ako vam treba više komada za cijeli projekt, ovdje su pakirani u vrećicama od 15 komada.
T avatar của tác giả 06.10.2026 08:10
Hi there, I have a 26x3 ALPEX pipe and need to connect it to a 1" male thread. Will this IVAR.RA brass fitting with the insert work directly without extra adapters?
A avatar của tác giả 06.10.2026 08:10
Yes, this compression fitting set is designed exactly for your 26x3 multilayer pipe and provides the required 1"M external thread connection. Just remember to use PTFE tape or hemp fibre on the threaded joint to ensure a tight seal. If you need matching female connectors, check our other fittings in the same category.
D avatar của tác giả 14.01.2022 15:27
Dobrý deň.cena je za kus,alebo balenie?dakujem
A avatar của tác giả 14.01.2022 15:27
Dobrý deň. Cena je za kus. Pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.