Eshop roka 2025 s vykurovacou technikou

Monikerroksinen IVAR-GAS -putki - 20x2 - 100m IVAR.GAS

Mã số: 87020436
Chưa được đánh giá Chi tiết đánh giá
3,92 € –19 %
Vykurovacia technika Viacvrstvové potrubie IVAR-GAS - 20x2 - 100m
3,92 € –19 % 3,14 € / met 2,55 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (144 met)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.ALPEX-GAS monikerroksinen putki, koko: 20 x 2, pakkaus: 100 m

 

  • maksimipaine PN 10, T = -20 °C - +60 °C
  • maksimikäyttöpaine PN 5
  • käyttö talojen kaasujakeluun, liitetään yksinomaan IVAR.PRESS-GAS -tyyppisillä puristusliittimillä
  • AL-kerros min. 0,4 mm

 

Miniminousu 10 metriä, sitten lisäykset 10 metrin välein.

Suositeltu käyttö PN 704 05 mukaan

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (veden, lämmityksen, kaasun, aurinkolämpöjärjestelmien, paineilman jne. jakelujärjestelmät) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - eri materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niille on sertifioitu eri väliaineet.
  • Miten tämä putki liitetään? Yleensä puristusliitoksilla (press) tai hitsauksella, järjestelmästä ja halkaisijasta riippuen - käytä yhteensopivia saman järjestelmän liittimiä.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, erityisesti kaasu-, paineilmanjakelujärjestelmissä tai hitsausliitoksissa asennus on varattu henkilölle, jolla on asianmukainen pätevyys.

Các thông số bổ sung

Danh mục hàng: IVAR.ALPEX-GAS - putket
Bảo hành: 2 năm
Trọng lượng: 0.139 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:08:28

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

G avatar của tác giả 01.11.2026 17:47
Hi there, can I join this with regular press fittings I already have, or does it need something specific? Also what's the max pressure this is rated for on gas?
A avatar của tác giả 01.11.2026 17:47
You need to use IVAR.PRESS-GAS fittings specifically - no other press fittings are compatible with this pipe for gas use. Max operating pressure for gas installation is PN 5. Also keep in mind this has to be installed by someone with the proper professional qualification, it's not a DIY job when it comes to gas piping.
M avatar của tác giả 19.01.2022 13:16
pozdravujem, prerábam v RD plynové rozvody. staré hrdzavé potrubie idem vyhodiť a chcem sa opýtať či sa dá zameniť za nejaké plastové, ktoré by sa dalo napojiť na ocelové čo vychádza z hodín.? Poprípade či sa dá tahať v zemi. Ide cca o 8m. Ďakujem za odpoveď
A avatar của tác giả 19.01.2022 13:17
Dobrý deň, čo sa týka ohľadne plynu, to prosím konzultujte so servisným technikom, ktorý ma na to oprávnenie. Sme len predaj a nieje možné na tutú otázku zodpovedne odpovedať. Pekný deň.
J avatar của tác giả 19.01.2022 13:15
da sa tato trubka ohybat strunou?DAKUJEM
A avatar của tác giả 19.01.2022 13:16
Dobrý deň, každé potrubie sa dá ohybáť strunou. Existuje vonkajšia alebo vnútorná. Pekný deň.
O avatar của tác giả 19.01.2022 13:15
Dobry den, toto potrubie viete predat aj na metre alebo iba na cele baliky? Kolko je v baliku?
A avatar của tác giả 19.01.2022 13:15
Dobrý deň. Viacvrstvové potrubie 20 x 2 sa predáva po 50 m. Prajem pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.