Eshop roka 2025 s vykurovacou technikou

Aksiaalinen manometri - takaosa 1/4"M; D50; 0-4 bar IVAR.MA 50

Mã số: MA50004BB
Chưa được đánh giá Chi tiết đánh giá
12,14 € –20 %
Vykurovacia technika Manometer axiálny - zadné napojenie  1/4"M; D50; 0-4bar
12,14 € –20 % 9,71 € / Cái 7,89 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Manometri - aksiaalinen, IVAR.MA 50, D 50, paine: 0 - 4 bar

 

  • halkaisija 50 mm
  • takaosa 1/4" M

 

Huomautus: Halkaisija 80 mm tilauksesta.

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiili/venttiili? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden on vastattava tai ylitettävä todelliset käyttöolosuhteet järjestelmässäsi, ja liitoskoko on oltava putken halkaisijan mukainen.
  • Miten tämä venttiili/venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava asiantuntija? Yksinkertaisempien sulkuventtiilien asentamisen voi tehdä myös kotimestari, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) kohdalla suosittelemme aina asiantuntijaa, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: aksiaalimanometrit
Bảo hành: 2 năm
Trọng lượng: 0.076 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:00:52

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

G avatar của tác giả 26.08.2026 14:50
Hi there, I have a small heating system at home and I just want to know if this pressure gauge will show me if something is wrong - like if the pressure goes too high or too low? I have no idea about the numbers, is 0-4 bar enough for a normal house boiler?
A avatar của tác giả 26.08.2026 14:50
Yes, this gauge shows you the current pressure in your system at a glance - if the needle drops too low or creeps too high, you'll know something needs attention. For a standard home heating system, the 0-4 bar range is just right, as most boilers run somewhere between 1 and 2 bar normally. It connects from the back with a 1/4" thread and the dial is 50mm across, so it's compact and fits neatly on a pipe or boiler fitting.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.