Eshop roka 2025 s vykurovacou technikou

Magnesium Alloy Sacrificial Anode with Zinc Plug - 6/4"x400mm; 32mm Diameter; 800-1500L IVAR.AM4

Mã số: 4000214
Chưa được đánh giá Chi tiết đánh giá
80,44 € –20 %
Vykurovacia technika Ochranná anóda z horčíkovej zliatiny s pozink. zátkou - 6/4"x400mm; pr. 32mm; 800-1500l
80,44 € –20 % 64,35 € / Cái 52,32 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.AM4

  • IVAR.AE - elektroninen suojaputki
  • IVAR.AM - magnesiumseoskorroosiosuojaputki sinkityllä tulpalla
  • IVAR.AM - magnesiumseoskorroosiosuojaputki sinkityllä tulpalla ja valvontalaitteella

Usein kysyttyä

  • Miten voin tarkistaa, sopiiko tuote järjestelmääni? Vertaa tuotteen kuvauksessa mainittuja mittoja, materiaaleja ja teknisiä tietoja järjestelmäsi vaatimuksiin. Epäselvyyksien ilmetessä ota meihin yhteyttä ja kuvaile järjestelmäsi tarkemmin.
  • Onko asennus tehtävä ammattilaisella? Yksinkertaisempien osien asentamisen voi tehdä myös taitava kotitalonomistaja, mutta kaasu-, sähkö- tai painejohdotuksiin liittyvissä toimenpiteissä suosittelemme aina ammattimaisen teknikon apua.

Các thông số bổ sung

Danh mục hàng: Suojusanodit
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:00:07

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

P avatar của tác giả 12.11.2026 14:51
Máte istotu, že táto horčíková anóda s pozinkovanou zátkou a rozmerom 6/4"x400mm sa hodí do môjho zásobníka o objeme 1200 litrov?
A avatar của tác giả 12.11.2026 14:51
Áno, tento model je určený pre zásobníky v rozsahu od 800 do 1500 litrov, takže by mal byť pre váš systém vhodný. Pre úplnú istotu si však skontrolujte, či sa zhodujú aj iné technické parametre a rozmery so špecifikáciou vášho systému. Pri nejasnostiach nám stačí napísať presný popis zapojenia a radi vám potvrdíme kompatibilitu.
G avatar của tác giả 16.09.2026 13:06
Van egy nagy bojlerem, valahol 1000 literes lehet, és szeretném kicserélni benne ezt a rozsdásodás ellen való dolgot. Fogalmam sincs, hogy melyik méret kell, és hogy egyáltalán be tudom-e rakni magam.
A avatar của tác giả 16.09.2026 13:06
Ez az anód pont 800-1500 literes bojlerekhez való, szóval a tiédbe tökéletesen passzol. A mérete 400 mm hosszú, 32 mm vastag, és 6/4"-os menettel csatlakozik – ha a bojleren van egy ilyen méretű nyílás (amit általában van), akkor egy megfelelő kulccsal be lehet csavarni, nem egy nagy művelet. Ha bizonytalan vagy, érdemes egy szerelőt is megkérdezni, mert rosszul berakva nem védi rendesen a tartályt.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.