Eshop roka 2025 s vykurovacou technikou

Loppuosa letkun liittämiseen - 1/2" M; 15 IVAR.853 G

Mã số: 853015015
Chưa được đánh giá Chi tiết đánh giá
3,27 € –19 %
Vykurovacia technika Koncový kus - pre napojenie hadice - 1/2"M; 15
3,27 € –19 % 2,62 € / Cái 2,13 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Loppuosa - letkun liitos, IVAR.853 G, koko: 1/2" M; 15, pakkaus: 50 kpl

 

  • PN 10, T = +120 °C
  • materiaali messinki CW617N
  • ATEST juomavedelle (RÚVZ Poprad)
  • IVAR.853 G - liitos sisäpihtiin

Usein kysytyt kysymykset

  • Miten valita oikea koko fittingille? Kierrerungon koon on vastattava tarkasti putkiston tai venttiilin kierrerunkoa, johon fiting kiinnitetään - lyhenteet FF (sisä-sisä) ja MF (ulko-sisä) nimessä ilmoittavat kierrerungon tyypin kummallakin puolella.
  • Onko tiivistysmateriaalia tarvittu asennuksessa? Kyllä, kierreliitoksiin käytetään standardisti teflonnauhaa tai hamppukangasta tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertaisen kierreliitoksen voi tehdä myös kotitalonmies perustaidoilla, mutta jos joudutaan koskemaan jo toimivaan putkistoon (erityisesti kaasuputkeen), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: päätösosat
Bảo hành: 2 năm
Trọng lượng: 0.034 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:06:46

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

W avatar của tác giả 15.10.2026 21:38
Hello, I am planning to install these brass fittings for a drinking water system and would like to confirm if the IVAR.853 G model is officially certified for potable use, as well as what sealing material you recommend for the threaded joints to ensure a leak-free connection?
A avatar của tác giả 15.10.2026 21:38
Yes, this product is certified for drinking water by RUVZ Poprad. For installation, we recommend using PTFE tape or hemp fibre with sealing paste to guarantee a tight seal on the thread. You can find similar end pieces in our category of fittings.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.