Eshop roka 2025 s vykurovacou technikou

Liitososuus - kierrekannalla - 1/2" F x EK; nikkelattu IVAR.RR 701 N

Mã số: 500632N
Chưa được đánh giá Chi tiết đánh giá
6,92 € –19 %
Vykurovacia technika Prechodka - s prevlečnou maticou  - 1/2"FxEK; nikel
6,92 € –19 % 5,54 € / Cái 4,50 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (1 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Liitoskappale, IVAR.RR 701 N, koko: 1/2" F x EK, pakkaus: 30 pussia / 240 pakkauslaatikkoon
- kierrekierteällä mutterilla
 
  • PN 10, T = +120 °C
  • mahdollistaa liittäminen Eurocone (EK) -lähtöisellä varusteella sisäpuolisen kierteen (F) siirtymisellä
  • materiaali nikkelöity messinki CW617N, EPDM-tiiviste

Usein kysyttyä

  • Miten valita oikean kokoinen liitoskappale? Kierteen mitta on täsmättävä putken tai varusteen kierteen kanssa, johon liitoskappale kiinnitetään - lyhenteet FF (sisäkierre-sisäkierre) ja MF (ulkokierre-sisäkierre) nimessä osoittavat kierteen tyypin kummallakin puolella.
  • Onko tiivistemateriaalia tarvittu asennuksen yhteydessä? Kyllä, kierteitetyt liitokset käyttävät vakiona teflonnauhaa tai hamppukangasta tiivistysaineella, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus tehtävä ammattilaisen toimesta? Yksinkertainen kierteitetty liitos onnistuu myös kotitalousmestarilta perusosaamisella, mutta jos joudutaan kosketuksiin jo toimivan järjestelmän kanssa (erityisesti kaasujärjestelmän), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: Läpimenot sovitteilla
Bảo hành: 2 năm
Trọng lượng: 0.081 kg
Liittimen tyyppi: siirtymäkappale
Kierteen koko: 1/2"
Liitäntätyyppi: sisäkierre, eurokartio (EK)
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:08:15

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 19.10.2026 13:56
Živjo, zanima me, ali je pri tej prehodki O-tesnilo že vgrajeno v fiting ali ga je treba dokupiti posebej, in ali je kljub temu potrebno dodatno tesnjenje z EK priključkom na strani armature. Prav tako me zanima, ali je navoj 1/2" F namenjen neposrednemu priklopu na cev z zunanjim navojem.
A avatar của tác giả 19.10.2026 13:56
Pozdravljeni, O-tesnilo EPDM je že del fitinga na strani Eurokonus priključka, tako da na tej strani dodatnega tesnjenja ne potrebujete. Na strani notranjega navoja 1/2" F pa je treba uporabiti teflonsko folijo ali kakšno drugo klasično tesnilo, saj gre za navojni spoj, ki ga priklopite na cev ali drug element z ustreznim zunanjim navojem. Material je nikljana medenina CW617N, fiting pa prenese do 10 bar in temperaturo do 120°C.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.