Eshop roka 2025 s vykurovacou technikou

Liitin - putki/putki- 63x63; PE FIV.07712

Mã số: I07712200
Chưa được đánh giá Chi tiết đánh giá
122,75 € –20 %
Vykurovacia technika Spojka - potrubie/potrubie- 63x63; PE
122,75 € –20 % 98,20 € / Cái 79,84 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Liitos - putki/putki- 63x63; PE

  • PN 16, T = -20 °C až +90 °C
  • PE-putkien saman halkaisijan liittämiseen
  • rungon materiaali messinki CW617N standardin EN 12165 mukaan, puristusrengas messinki CW614N standardin EN 12164 mukaan, O-rengas NBR, O-rengas STOP

Usein kysyttyä

  • Miten valitsen oikean kokoisen liittimen? Kierrerungon tulee täsmätä putken tai varusteen kierrerungon kanssa - lyhenteet FF (sisäkierre-sisäkierre) ja MF (ulkokierre-sisäkierre) nimessä ilmoittavat kierretyypin kummallakin puolella.
  • Onko tiivisteaine tarpeen asennuksessa? Kyllä, kierreliitoksiin käytetään yleensä teflonnauhaa tai hamppukuitua tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus ammattilaisen tehtävä? Perusosaaminen riittää kotityöläiselle yksinkertaisen kierreliitoksen tekoon, mutta jos joudutaan koskemaan jo toimivaan putkistoon (erityisesti kaasuputkistoon), suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: Liittimet - putki / putki
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:10:30

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 29.10.2026 16:34
Jó napot kívánok, szeretném megkérdezni, hogy ez a 63x63-as karmantyú alkalmas-e két azonos külső átmérőjű PE csővezeték tartós, menet nélküli összekötésére, vagy kizárólag ideiglenes, javítási célú felhasználásra ajánlott? Továbbá érdeklődnék, hogy -20 °C alatti környezeti hőmérséklet esetén számíthatok-e a tömítés épségének megőrzésére.
A avatar của tác giả 29.10.2026 16:34
Jó napot kívánok! Ez a karmantyú nyugodtan használható tartós kötésre is, nem csak ideiglenes javításra - a PN 16 nyomásra és -20 °C-tól +90 °C-ig terjedő hőmérséklet-tartományra van tervezve, szóval normál üzemi körülmények között megbízhatóan tartja a kötést. A tömítést az NBR O-gyűrű adja, a szorítógyűrű pedig sárgarézből készül, ezek együtt biztosítják a tartósságot. -20 °C alá viszont már nem ajánlott menni, mert az a megadott tartomány határa.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.