Eshop roka 2025 s vykurovacou technikou

Lämpöpatteriventtiili VD - suora malli - 1/2" IVAR.VD 201

Mã số: 501452
Chưa được đánh giá Chi tiết đánh giá
15,13 € –20 %
Vykurovacia technika Radiátorový ventil VD  - priame vyhotovenie - 1/2"
15,13 € –20 % 12,10 € / Cái 9,84 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (88 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.VD 201 - Suora säätöventtiili, IVAR.VD 201, koko: ½", pakkaus: 8 kpl pussi / 64 kpl laatikko

 

Các thông số bổ sung

Danh mục hàng: Suora / kulma - klassinen
Bảo hành: 2 năm
Trọng lượng: 0.204 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:11:24

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

G avatar của tác giả 17.10.2026 12:55
Jag behöver verifiera om denna radiatorsventil i direktutförande är fullt kompatibel med mitt befintliga system av stålrör, särskilt gällande maxtemperaturgränsen och materialets egenskaper för att säkerställa en långsiktig driftsäkerhet.
A avatar của tác giả 17.10.2026 12:55
Ventilen är designad för att anslutas till stålrör och tål temperaturer upp till +120 °C, vilket täcker de flesta vanliga värmesystem. Materialet är nickelpatinerad messing (CW617N), vilket ger god korrosionsbeständighet vid användning under dessa förhållanden. Det är en pålitlig lösning för klassiska installationer där rakt tilltätningsbehov finns.
M avatar của tác giả 14.01.2022 15:53
Dobrý deň. Chcem sa opýtať, či máte na sklade samoodvzdušňovacie ventily Flamco Flexvent 1/2" a za akú cenu. Ďakujem
A avatar của tác giả 14.01.2022 15:54
Dobrý deň, žiaľ nie, tento tovar nemáme v ponuke.
V avatar của tác giả 14.01.2022 15:52
Dobrý deň prajem, je možne 16 mm PVC ruru napojiť na priamo na 1/2 " radiatorový ventil , alebo treba použiť eurokonus, tak ako pri nerezovom rozdeľovači kde sa používa 3/4 eurokonus na napojenie na 16 potrubie? Ďakujem
A avatar của tác giả 14.01.2022 15:53
Dobrý deň. Možné to skôr nie je, s takým prechodom alebo adaptérom som sa ešte nestretol, vlastne ani s trúbkami. Nemáte na mysli náhodou pexalpex rúru alebo iný materiál??? Najlepšie bude, ak napíšete presne čo myslíte, na každú je totiž iný prechod. Pekný deň
V avatar của tác giả 14.01.2022 15:53
Ďakujem pekne. Samozrejme že ide o rurky 16 pexalpex. Podľa mňa použiť 1/2 " eurokonus, ktorý sa napojí na rozdeľovaš kde su 3/4"výstupy na rozvod spomínaných rur . To iste sa použije aj na napojenie 1/2 " radiatorových ventilov. Použitý bude 1/2 " ventil na ktorý sa napoji pexalpex rura pomocou euroknusu na ktorom je šrobenie s vnutorným 3/4 "závitom čize tak isto ako na rozdelovači Podľa mňa by to malo byť a malo by to fungovať. Ide o rozdeľovač na raditory 5 vetvový čo máte v ponuke. Ďakujem
A avatar của tác giả 14.01.2022 15:52
Dobrý deň. Ak ide teda o pexalpex rúrky, treba použiť na jednotlivé vetvy tento adaptér https://www.atria.sk/zverne-srobenie-na-potrubie-alpex-16-x-2-alu-ek-500684/. Pekný deň

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.