Eshop roka 2025 s vykurovacou technikou

Kylpyhuoneen termostaattiventtiili OPTIMA kolmiulotteinen - 1/2"xM24; oikea; ruostumaton teräs IVAR.DV 016

Mã số: 530010INOX
Chưa được đánh giá Chi tiết đánh giá
90,28 € –20 %
Vykurovacia technika Kúpeľňový termostatický ventil OPTIMA trojosový - 1/2"xM24; pravý; inox
90,28 € –20 % 72,22 € / Cái 58,72 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Optima-termostaattiventtiili - kolmisuuntainen - P, IVAR.DV 016, koko: 1/2" x M 24, ruostumaton teräs

 

  • PN 10, T = +100 °C
  • IVAR.DV 016 - oikea (P)
  • säädettävä liitos, termostaattiventtiili ja säätöruuvi sisältävät termostaattisen insertin
  • liitäntäkoko päähän M 30 x 1,5
  • materiaali messinki CW617N pinnoitteella

Usein kysyttyä

  • Miten valita oikean tyyppinen ja kokoinen venttiili? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on mainittu teknisissä tiedoissa - niiden tulee vastata tai ylittää järjestelmäsi todelliset käyttöolosuhteet, ja liitännän koon tulee vastata putken halkaisijaa.
  • Kuinka tämä venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisemmissa sulkuventtiileissä kotitalousmies voi tehdä asennuksen, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätimet) kohdalla suosittelemme aina ammattilaista, koska kyseessä ovat turvallisuustoiminnot.

Các thông số bổ sung

Danh mục hàng: termostaattiventtiili OPTIMA - suora / kulma, kolmiakselinen
Bảo hành: 2 năm
Trọng lượng: 0.335 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:05:59

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

M avatar của tác giả 11.11.2026 14:40
Čau, kupujem tento ventil do kúpeľne a neviem či sa hodí na bežné potrubie. Je to ten pravý pre mňa? A aká je tá veľkosť M24?
A avatar của tác giả 11.11.2026 14:40
Ahoj, tento model je pravý (označený ako P) a má pripojenie 1/2" x M 24, takže musíš mať v systéme rovnaké rozmery. Materiál je mosadz s úpravou inox a vydrží teplotu až do 100 °C. Ak si nie istý rozmerom, radšej skontroluj priemer tvojho potrubia, aby sa to zhodovalo.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.