Eshop roka 2025 s vykurovacou technikou

Kulmayksikkö letkun liittämiseen - 3/4"M; 20 IVAR.853 G

Mã số: 853020020
Chưa được đánh giá Chi tiết đánh giá
3,96 € –19 %
Vykurovacia technika Koncový kus - pre napojenie hadice - 3/4"M; 20
3,96 € –19 % 3,17 € / Cái 2,58 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Lopputyppi - letkun liitos, IVAR.853 G, koko: 3/4" M; 20, pakkaus: 25 kpl

 

  • PN 10, T = +120 °C
  • materiaali messinki CW617N
  • ATEST juomavedelle (RÚVZ Poprad)
  • IVAR.853 G - liitos sisäpihtiin

Usein kysyttyä

  • Miten valita oikea kokoinen liitin? Kierrerungon koon on vastattava tarkasti putkiston tai varusteen kierreosaan, johon liitin kiinnitetään - lyhenteet FF (sisä-sisäkierre) ja MF (ulko-sisäkierre) nimessä ilmoittavat kierretyypin kummallakin puolella.
  • Onko tiivisteaine tarpeen asennuksessa? Kyllä, kierreliitoksiin käytetään standardisti teflonnauhaa tai hamppukuitua tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus ammattilaisen tehtävä? Yksinkertaisen kierreliitoksen voi tehdä perustaidoilla myös kotitalon omistaja, mutta jos tehdään toimivaan putkistoon (erityisesti kaasuputkeen) kosketus, suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: päätösosat
Bảo hành: 2 năm
Trọng lượng: 0.05 kg
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:07:17

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 20.10.2026 21:31
I am writing to inquire whether this brass end piece, specifically the 3/4" M variant with a 20 mm dimension, is compatible for connecting to an existing internal thread fitting and if standard PTFE tape would suffice for sealing the joint.
A avatar của tác giả 20.10.2026 21:31
Yes, this IVAR.853 G fitting is designed exactly for connection to an internal thread, so it will match your setup. You should use PTFE tape or hemp fibre with sealing paste to ensure a perfectly tight seal during installation. If you need other fittings for the same system, please check our category of end pieces.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.