Eshop roka 2025 s vykurovacou technikou

Kulmaventtiili kierteellä - kolmiosainen - sarja C3; ruostumaton - 3" - L=182 mm BRA.C3.622

Mã số: C3622300
Chưa được đánh giá Chi tiết đánh giá
1 130,37 € –20 %
Vykurovacia technika Guľový uzáver závitový - trojdielny - séria C3; nerez- 3"; L=182mm
1 130,37 € –20 % 904,30 € / Cái 735,20 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Palloventtiili kierrettävä - kolmiosainen, BRA.C3.622, koko: 3", pituus: 182 mm
 
  • max. paine 63 bar, kierteet mitoituksessa 1/4" - 4" ISO 228-1 mukaan
  • T = -25 °C - +180 °C
  • lämmitys- ja ilmastointijärjestelmissä, talousvedessä, kemianteollisuudessa, öljyissä ja hiilivedyissä
  • materiaali runko: ruostumaton teräs A351 CF8M, pallo ja varsi ruostumaton AISI 316
  • tiiviste materiaali: pallo PTFE, varsi PTFE ja FKM (Viton©)
  • kolmiosainen, täysvirtaava, mahdollisuus lisätä sähkömoottorilla (ISO 5211 mukaan)
  • antistaattinen malli, lukittavalla vivulla
  • ei sovellu höyryyn ja virtauksen säätöön
  • ATEST talousvedelle, RÚVZ Poprad, ATEX EU-asetuksen 2014/34/EU mukaan

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille? Ohjaa nimellispainetta (PN) ja käyttölämpötilaa (T) teknisistä tiedoista - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisemmissa sulkuventtiileissä kotimies voi tehdä asennuksen, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineensäätöventtiilit) asennuksessa suosittelemme aina ammattilaista, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: BRA.C3.622 - GV-sarja C3 - 3-osainen
Bảo hành: 2 năm
Trọng lượng: 11.805 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:10:26

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 18.11.2026 16:26
Papa will den Kugelhahn für unsere Heizung einbauen, aber wir wissen nicht ob der auch für Dampf geht oder nur für normales Heizungswasser. Geht sich das bei uns aus mit der Temperatur, wir haben so ca. 70 Grad im System?
A avatar của tác giả 18.11.2026 16:26
Für Dampf ist der Kugelhahn nicht geeignet, das steht auch so in den Daten. Für eure Heizung passt er aber gut, der Hahn ist für Temperaturen von -25°C bis +180°C ausgelegt, da sind eure 70 Grad locker drin. Wichtig ist nur noch, dass die Anschlussgröße 3" zu eurem Rohr passt, dann steht dem Einbau nichts im Weg.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.