Eshop roka 2025 s vykurovacou technikou

Korrugated GAS Gas-tight conduit - 20 - 50m IVAR.KOT-GAS

Mã số: 79720236
Chưa được đánh giá Chi tiết đánh giá
1,11 € –19 %
Vykurovacia technika Korugovaná rúrka GAS plynotesná chránička - 20 - 50m
1,11 € –19 % 0,89 € / met 0,72 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (300 met)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Koruguroitu kaasuputki GAS tiiviyssuoja, IVAR.KOT-GAS, koko: 20, pakkaus: 50 m

 

  • käytetään kaasuvuodon tunnistamiseen
  • suojaa ympäröivän alueen kaasuvuodoilta
  • parantaa kaasuputken mekaanista kestävyyttä

* IVAR.PRESS-GAS -liittimen käyttö vaatii suuremman halkaisijan korugoidun putken

SUOJAKEHYS MYYDÄÄN VAIN KOKONAISINA PAKKAUKSINA

Suositeltu käyttö PN 704 05 mukaisesti

 

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (veden, lämmityksen, kaasun, aurinkojärjestelmien, paineilman jne. jakelujärjestelmät) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - eri materiaalit (ruostumaton teräs, hiiliteräs) kestävät korroosiota eri tavalla ja niillä on erilaisia sertifioituja väliaineita.
  • Miten tämä putki liitetään? Yleensä puristus- tai hitsausliitoksilla, järjestelmästä ja halkaisijasta riippuen - varmista, että käytät yhteensopivia liittimiä samasta järjestelmästä.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, erityisesti kaasu-, paineilma- tai hitsausliitosten osalta asennus on varattu henkilölle, jolla on asianmukainen ammatillinen pätevyys.

Các thông số bổ sung

Danh mục hàng: IVAR.KOT-GAS - suojaputket
Bảo hành: 2 năm
Trọng lượng: 0.072 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 03.06.2026 1:07:46

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

L avatar của tác giả 19.01.2022 13:22
dobry den, mate prosim v ponuke chranicku plynu DN200?
A avatar của tác giả 19.01.2022 13:23
Dobrý deň, Chráničku plynu DN 200 žiaľ v ponuke nemáme. Prajem Vám pekný zvyšok dňa.
J avatar của tác giả 19.01.2022 13:22
Dobry den. Na ruru 20 Plasthlinik potrebujem 20 alebo 26 chranicku?
A avatar của tác giả 19.01.2022 13:22
Dobrý deň. Chraničku treba vyberať vždy o jeden rozmer vyššie, takže 26. Pekný deň
P avatar của tác giả 19.01.2022 13:21
Na jestvujúci rozvod plynu pr.20 mm ako viem inštalovať chráničku s protipožiarnou ucpávkou. Ďakujem
A avatar của tác giả 19.01.2022 13:22
Dobrý deň, ono sa to už nedá ak už je raz potrubie dané tak to tam nedáte. Robí sa to priamo pri montáži. Prajem pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.