Eshop roka 2025 s vykurovacou technikou

Korkean lämpötilan kuitukumitiiviste - 20 mm; 1"; 30x21x2 mm IVAR.OMNIA SO

Mã số: I091GES48
Chưa được đánh giá Chi tiết đánh giá
1,12 € –19 %
Vykurovacia technika Vysokoteplotné vláknitopryžové tesnenie - 20mm; 1"; 30x21x2mm
1,12 € –19 % 0,90 € / Cái 0,73 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Tiivisteiden sarja - 20mm; 1"; 30x21x2mm

  • PN 16, T max. +370 °C, paksuus 2 mm
  • korkeapaineinen universaali kuitukumitiiviste korkeille lämpötiloille ja kierteisliitoksille
  • käyttö vesi, lämmitys, elintarviketeollisuus, aurinkolämpöjärjestelmät
  • asbestiton
  • kiinnityspaineet DIN 28090 mukaisesti

Usein kysyttyä

  • Miten valita oikea laite- tai venttilityyppi ja koko? Noudata teknisissä tiedoissa mainittua nimellistä painetta (PN) ja käyttölämpötilaa (T), jotka on oltava vähintään todellisten käyttöolosuhteiden mukaiset, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä laite tai venttiili toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, paluukulku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) asennus on aina suositeltavaa antaa ammattilaiselle, koska kyse on turvallisuustoiminnoista.

Các thông số bổ sung

Danh mục hàng: korkealämpötilatiiviste
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:08:02

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

T avatar của tác giả 02.11.2026 19:21
Üdvözlöm, apával most cseréljük a kazán csöveit és ezt a tömítést vennénk az 1"-os menethez. Bírja ezt 370 fokig, vagy az csak rövid ideig igaz, mert nálunk a kazán elég sokat megy?
A avatar của tác giả 02.11.2026 19:21
Szia! A 370°C-os érték a tartós üzemi hőmérséklet, nem valami rövid csúcsérték, szóval nyugodtan mehet rá a kazán folyamatos működése is. PN 16 nyomásig bírja, úgyhogy sima fűtési rendszerbe simán elég lesz, csak arra figyeljetek, hogy az 1"-os menethez tényleg a 30x21x2mm méret illik.
B avatar của tác giả 15.10.2026 15:37
Da li ova vlaknata guma od 2 mm može zamijeniti standardnu brtvu na mojem kotlu za grijanje koji radi pod tlakom do 10 bara i temperaturama do 350 °C?
A avatar của tác giả 15.10.2026 15:37
Ova brtva je dizajnirana upravo za takve uvjete jer izdržava temperature do +370 °C i ima nazivni tlak PN 16, što pokriva vaših 10 bara. Debljina od 2 mm odgovara specifikaciji koju tražite, a materijal je siguran za sustave grijanja i vode bez azbesta. ODGOVOR: (Napomena: U formatu traženom u zadatku nije bilo polje "ODGOVOR" već "ODPOVED", pa je gore ispravno korišteno polje ODPOVED).

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.