Eshop roka 2025 s vykurovacou technikou

Kompaktti kylpyhuonesarja OPTIMA - 1/2"xM24; ALPEX 16x2mm; suora; kromattu IVAR.KIT DV 10316

Mã số: KIT530005CHROM16
Chưa được đánh giá Chi tiết đánh giá
210,33 € –20 %
Vykurovacia technika SADA kompaktná kúpeľňová OPTIMA - 1/2"xM24; ALPEX 16x2mm; priamy; chróm
210,33 € –20 % 168,26 € / Cái 136,80 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Optima-kompaktisarja - suora, IVAR.DV 10316, koko: 1/2" x M 24, ALPEX 16 x 2 mm, kromattu

 

  • PN 10, T = +100 °C
  • vaihteleva liittäminen, termostaattinen venttiili ja säätöruuvit sisältävät termostaattisen insertin
  • IVAR.KIT DV 10316 - suora malli, ALPEX Ø 16 x 2 mm liitos
  • materiaali messinki CW617N pintakäsittelyllä

 

Huomio: Sarja koostuu Optima-kompaktisesta patteriventtiilistä,
Optima-termostaattisesta päästä, Optima-puristusliittimestä kuparille tai
monikerroksiselle ALPEX-putkelle ja Optima-kaksoiskorkista, kiristysmomentti IVAR.DF 03 = 25-35 Nm, IVAR.DF 01 = 30-40 Nm.

Usein kysyttyä

  • Miten valita oikea tyyppi ja koko venttiilille/armatuurille? Noudata nimellistä painetta (PN) ja käyttölämpötilaa (T) teknisissä tiedoissa - niiden on vastattava tai ylitettävä järjestelmäsi todelliset käyttöolosuhteet, ja liitoskoko on sovitettava putken halkaisijaan.
  • Miten tämä venttiili/armatuuri toimii? Tarkka toimintaperiaate (sulkeminen, paineen säätö, takaisku jne.) riippuu tietystä tyypistä - yksityiskohtainen toiminnan kuvaus löytyy yllä tästä tuotteesta.
  • Onko asennuksen suoritettava ammattilainen? Yksinkertaisempien sulkuventtiilien asennus onnistuu myös kotityöläiseltä, mutta säätö- ja turvalaitteiden (turvaventtiilit, paineenalennusventtiilit) asennuksessa suosittelemme aina ammattilaista, koska kyseessä on turvallisuustoiminto.

Các thông số bổ sung

Danh mục hàng: OPTIMA-kompaktiset kylpyhuonesetit - suorat / kulmalliset
Bảo hành: 2 năm
Trọng lượng: 1.137 kg
EAN: 8595145907243
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:12:25

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

C avatar của tác giả 24.10.2026 19:01
Ciao, ho tubi in AlpeX da 16x2 mm e vorrei sapere se questo set compatta OPTIMA è compatibile senza bisogno di adattatori specifici per il collegamento.
A avatar của tác giả 24.10.2026 19:01
Sì, questo kit è progettato proprio per i tubi ALPEX Ø 16 x 2 mm, quindi non servono adattatori aggiuntivi per quel diametro. Il riduttore incluso permette di collegare direttamente sia il tubo rame che quello multistrato nella misura indicata. Se hai dubbi su altri diametri, controlla sempre le specifiche tecniche della tua installazione prima dell'ordine.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.