Eshop roka 2025 s vykurovacou technikou

Kulmaliitin PUSH 90°- PPSU - 16x16 IVAR.PUSH-K

Mã số: 88316200
Chưa được đánh giá Chi tiết đánh giá
12,24 € –20 %
Vykurovacia technika Koleno PUSH 90°- PPSU - 16x16
12,24 € –20 % 9,79 € / Cái 7,96 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

90° - PPSU, IVAR.PUSH - K, koko: 16 x 16, pakkaus: 10 kpl

 

  • PN 10, T = +120 °C
  • yksinkertaiseen ALPEX-putkien liittämiseen saman halkaisijan putkiin ilman puristusvälineitä
  • materiaali muovi PPSU, holkki ruostumaton teräs, tiiviste EPDM

Usein kysyttyä

  • Mitä työkaluja tarvitsen liitososan asentamiseen? Press-liitokset vaativat erikoistuneet puristuspihdit oikean tyyppisellä leualla (yleensä merkitty B, F tai TH järjestelmän mukaan) vastaamaan liitososan kokoa ja tyyppiä - ilman oikeaa työkalua liitosta ei voi muodostaa eikä tarkistaa.
  • Mistä tiedän, että liitos on oikein puristettu? Laadukkaissa press-liitoksissa on puristusindikaattori (esim. tiiviste O-rengas, joka vuotaa, jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina tehtävä järjestelmän paineenkestävyystesti.
  • Voiko liitoksen purkaa sen jälkeen, kun se on puristettu? Ei, toisin kuin puristusliitos, puristusliitos on pysyvä ja sen purkaminen vaatii liitososan leikkaamisen ja korvaamisen uudella.
  • Pitääkö asennuksen suorittaa ammattilainen? Kyllä, liitososien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysasentajalle, erityisesti liitoksille, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: PUSH 90° - PPSU -kulmat
Bảo hành: 2 năm
Trọng lượng: 0.066 kg
EAN: 4013960367997
Liittimen tyyppi: kaari / mutka
Putken halkaisija: 16 mm
Materiaali: muovi
Liitäntätyyppi: työntöliitos (push)
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 26.05.2026 13:39:10

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

T avatar của tác giả 05.10.2026 11:44
Hello, I am writing to inquire if the PUSH elbow 90° in PPSU size 16 x 16 is fully compatible with ALPEX pipes of the same diameter for a system operating at temperatures up to +120 °C, and whether this specific fitting can be disassembled after installation if an adjustment becomes necessary.
A avatar của tác giả 05.10.2026 11:44
Yes, this fitting is designed specifically for easy connection of ALPEX pipes with the same diameters and handles temperatures up to +120 °C. However, please note that once pressed, the joint is permanent and cannot be taken apart without cutting out the fitting and replacing it with a new one. For more details on installation requirements, you may also want to check our other products in the category of elbows PUSH 90° - PPSU.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.