Eshop roka 2025 s vykurovacou technikou

Kulmaliitin PRESS 90° - 40x40 IVAR.PT 5710

Mã số: 510035
Chưa được đánh giá Chi tiết đánh giá
38,75 € –20 %
Vykurovacia technika Koleno PRESS 90° - 40x40
38,75 € –20 % 31 € / Cái 25,20 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (19 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

90° press-kolmio, IVAR.PT 5710, koko: 40 x 40, pakkaus: 1 pussia / 20 koko pakkaus

 

Usein kysyttyä

  • Mitä työkaluja tarvitsen liittimen asennukseen? Press-liittimet vaativat erikoistuneet puristuspihdit oikean tyyppisellä leualla (yleensä merkitty B, F tai TH järjestelmän mukaan) vastaamaan liittimen kokoa ja tyyppiä - ilman oikeaa työkalua liitosta ei voi muodostaa eikä tarkistaa.
  • Kuinka tiedän, että liitos on oikein puristettu? Laadukkaat press-liittimet sisältävät puristusindikaattorin (esim. tiiviste O-rengas, joka vuotaa jos puristus ei ole valmis) - ennen kuin liitos upotetaan seinään tai laastiin, on aina tehtävä järjestelmän paineenkestävyystesti.
  • Voiko liitoksen puristaa auki sen jälkeen kun se on puristettu? Ei, toisin kuin puristusliitoksessa, puristusliitos on pysyvä ja sen purkaminen vaatii liittimen leikkaamisen ja korvaamisen uudella.
  • Pitäisikö asennuksen suorittaa ammattilainen? Kyllä, liittimien puristus vaatii ammattitaitoa ja oikein kalibroituja työkaluja - suosittelemme antamaan lämmitysasentajalle, varsinkin liitoksille, jotka upotetaan seinään tai laastiin ilman mahdollisuutta myöhempää tarkastusta.

Các thông số bổ sung

Danh mục hàng: 90° press-kulmat
Bảo hành: 2 năm
Trọng lượng: 0.463 kg
Liittimen tyyppi: kaari / mutka
Putken halkaisija: 40 mm
Liitäntätyyppi: puristusliitos
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 26.05.2026 13:52:29

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

O avatar của tác giả 12.11.2026 21:54
Hello, can I use these 40x40 nickel-plated brass elbows with standard compression tools or do I strictly need B-F-TH crimping pliers?
A avatar của tác giả 12.11.2026 21:54
You must use specialized crimping pliers with the correct B, F, or TH jaws because a proper joint cannot be made or checked without them. This fitting is designed for press connections only and cannot be disassembled later like a screwed one. We recommend leaving the installation to a professional plumber with calibrated tools.
M avatar của tác giả 04.10.2026 08:37
Czy te koleno 40x40 pasuje do moich rur ALPEX i jakie dokładnie kleszcze muszę mieć, żeby to zlisować?
A avatar của tác giả 04.10.2026 08:37
Tak, kształtka jest dedykowana do rur ALPEX o średnicy 40 mm. Do montażu potrzebujesz specjalistycznych kleszczy z szczękami typu B, F lub TH dopasowanymi do tego rozmiaru – bez nich nie uzyskasz trwałego połączenia. Pamiętaj, że po zaliszeniu nie da się już rozebrać tej części, więc lepiej oddaj to w ręce fachowca.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.