Eshop roka 2025 s vykurovacou technikou

Kierrekytkentä - kierre - 5/4"M x 5/4"M; messinki IVAR.AC 606 N

Mã số: 500387
Chưa được đánh giá Chi tiết đánh giá
28,78 € / Cái 23,40 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Vsuvka - kierre, IVAR.AC 606 N, koko: 5/4" x 5/4", pakkaus: 10 kpl pussia kohti / 80 kpl koko laatikko,

 

  • PN 10, T = +120 °C
  • mahdollistaa samanmittaisten jakotukkien liittämisen toisiinsa ilman tarvetta kiertoliikkeelle liitettävien kappaleiden välillä
  • ulkokierre - ulkokierre MM
  • materiaali nikkelöity messinki CW617N, 2 x EPDM-tiiviste, 5/4” messinki CW617N

Usein kysyttyä

  • Miten valita oikean kokoinen putkiosa? Kierreluvun tulee vastata tarkasti putken tai varusteen kierrelukua, johon liitososa kiinnitetään - lyhenteet FF (sisäkierre-sisäkierre) ja MF (ulkokierre-sisäkierre) nimen yhteydessä ilmoittavat kierretyypin kummallakin puolella.
  • Onko tiivisteaine tarpeen asennuksessa? Kyllä, kierreliitoksiin käytetään standardisti teflonnauhaa tai hamppukuitua tiivistyspastaa käyttäen, jotta varmistetaan liitoksen täydellinen tiiveys.
  • Onko asennus ammattilaisen suoritettava? Yksinkertaisen kierreliitoksen voi tehdä myös kotitalouden mestari perustaidoilla, mutta jos tehdään toimivaan putkistoon (erityisesti kaasuputki) liittyvä toimenpide, suosittelemme ottamaan yhteyttä asentajiin, jotka myös tarkistavat liitoksen tiiveyden.

Các thông số bổ sung

Danh mục hàng: kääntyvät liittimet
Bảo hành: 2 năm
Trọng lượng: 0.268 kg
Liittimen tyyppi: nippa
Kierteen koko: 5/4"
Materiaali: messinki
Liitäntätyyppi: ulkokierre
Saatavuus: Varastossa tai toimittajalla
Posledná aktuálizacia ceny: 13.04.2026 1:02:54

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 15.11.2026 07:39
Czy ta wkładka pasuje do rur, które mam w domu, bo nie wiem, czy te 5/4 to dobry rozmiar?
A avatar của tác giả 15.11.2026 07:39
Tak, pod warunkiem, że Twoje rury mają dokładnie taki sam gwint – wymiar 5/4" musi idealnie odpowiadać średnicy Twojej armatury. Jeśli masz wątpliwości co do dopasowania, warto zmierzyć gwint na istniejących elementach przed zakupem. Pamiętaj też, że przy montażu potrzebna będzie taśma teflonowa lub lina z pastą, żeby wszystko szczelnie trzymało.
A avatar của tác giả 17.10.2026 20:19
Guten Tag, ich plane die Installation eines Heizkreisverteilers und benötige eine Lösung, um zwei Bauteile gleicher Abmessung von 5/4" zu verbinden, ohne dass sich diese beim Anziehen drehen. Da das Produkt als „nickelfreies Messing CW617N" mit O-Ringen aus EPDM beschrieben ist, frage ich mich, ob bei dieser spezifischen Schraubverbindung zusätzlich Teflonband oder Hanf mit Dichtmasse zur Gewährleistung der Dichtheit erforderlich ist?
A avatar của tác giả 17.10.2026 20:19
Hallo Andreas, ja, für diese Verbindung ist standardmäßig ein Dichtungsmaterial wie Teflonband oder Hanf mit Masse notwendig, damit die Schraubverbindung absolut dicht hält. Das Drehschloss ermöglicht Ihnen das Andrehen ohne Drehbewegung der angrenzenden Teile, was bei Ihrer Anwendung sehr praktisch ist. Wenn Sie weitere Fragen zur Montage haben, können Sie gerne auch unsere Kategorie für Nippel drehbar konsultieren.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.