Eshop roka 2025 s vykurovacou technikou

Käyttövesitermostaattipää - kapillaariputki 2m; upotettava anturi - +20 °C - +60 °C IVAR.T 5011

Mã số: 501175
Chưa được đánh giá Chi tiết đánh giá
51,41 € –20 %
Vykurovacia technika Termostatická hlavica kvapalinová - kapilára 2m; čidlo ponorné - + 20 ° C až + 60 ° C
51,41 € –20 % 41,13 € / Cái 33,44 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa (2 Cái)

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Termostattipää - nesteinen, IVAR.T 5011, koko: M 30 x 1,5, Ø anturin 11,5 mm, kapillaariputken pituus 2 m

 

  • IVAR.T 5011 - säätöalue +20 °C - +60 °C
  • liitäntäkoko M 30 x 1,5
  • anturin Ø 11,5 mm
  • kapillaariputken pituus 2 m
  • vain IVAR.DUAL, DUAL-MIX -jakotukkeille IVAR.DUAL, DUAL-MIX

Các thông số bổ sung

Danh mục hàng: Termostaattipäät kapillaarilla
Bảo hành: 2 năm
Trọng lượng: 0.224 kg
Tyyppi: termostaattipää
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:04:28

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

V avatar của tác giả 16.10.2026 17:07
Ez a fejszelep csak az IVAR.DUAL és DUAL-MIX elosztókhoz működik, vagy más márkájú rendszerbe is bedugom?
A avatar của tác giả 16.10.2026 17:07
Nem, ez a modell kifejezetten csak az IVAR.DUAL és DUAL-MIX elosztókhoz való. A specifikáció egyértelműen ezt írja, így más típusra nem fog illeszkedni a csatlakozás.
A avatar của tác giả 14.01.2022 16:16
Dobry den. Potreboval by som ventil s kapilarou ktory by otvaral ked teplota na kapilare dosiahne 60°C.
A avatar của tác giả 14.01.2022 16:17
Dobrý deň. Ak myslíte ventil a nie hlavicu, tak také niečo máme len thermovar https://www.atria.sk/termoregulacny-prepustaci-ventil-1-4325/ , tu máte zoznam ale všetkých https://www.atria.sk/kurenie-profesionalne-ivar/regulacne-a-poistne-armatury/termoreg-prepustacie-ventily/ potom nejaký iný samočinný ventil už nie.
P avatar của tác giả 08.12.2021 09:50
HERZ termostatický ventil 1/2" DN15 priamy TS-90 k Bezdrátovej termohlavici Hama SMART ale nie som si isty ci to je kompatibilné. Vedeli by ste mi poradiť. Vopred ďakujem
A avatar của tác giả 08.12.2021 09:51
Dobrý deň, môžeme Vám ponúknuť nasledujúce riešenie: https://slovensko.atria-europe.com/Termostaticka-programovatelna-hlavica-Saswell-SEA801-d551.htm + https://slovensko.atria-europe.com/Termostaticky-ventil-dvojregulacny-priamy-d844.htm Pekný deň.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.