Eshop roka 2025 s vykurovacou technikou

Kaasusuodatin - kierteellinen - 6/4""; PN 6; 10µm IVAR.FM

Mã số: FM060000B10
Chưa được đánh giá Chi tiết đánh giá
118,57 € –20 %
Vykurovacia technika Plynový filter - závitový - 6/4"; PN 6; 10µm
118,57 € –20 % 94,86 € / Cái 77,12 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kaasusuodatin - kierteinen, IVAR.FM, koko: 6/4", PN 6, 10 μm, pakkaus: 1 kpl

 

  • maksimityöpaine PN 6
  • T = -40 °C - +70 °C
  • suodatuskerroksen huokoisuus 10 μm
  • käyttö kaasukäyttöisen käyttöaineen pölyn ja epäpuhtauksien erottamiseen
  • kaikkien suodattimien jälkeen asennettujen kaasulaitteiden suojaus
  • materiaali painevalu alumiini
  • yhteensopiva standardin STN EN 161 kanssa

 

Huomio: Tilaustuote huokoisuus 20 μm ja mitta DN 125 - DN 300 huokoisuudella 10 μm.

Usein kysyttyä

  • Mihin tarkoitukseen tämä putki on tarkoitettu? Tarkka määrittely (vesi-, lämmitys-, kaasu-, aurinkojärjestelmät, paineilma jne.) löytyy tuotteen kuvauksesta ja teknisistä tiedoista - erilaiset materiaalit (ruostumaton teräs, hiiliteräs) ovat erilaisia korroosionkestävyyksiä ja eri mediaa, joille ne on sertifioitu.
  • Miten tämä putki liitetään yhteen? Yleensä puristus- tai hitsausliitoksilla, järjestelmästä ja halkaisijasta riippuen - käytä saman järjestelmän yhteensopivia liittimiä.
  • Onko asennuksen suoritettava ammattilainen? Kyllä, erityisesti kaasu-, paineilma- tai hitsausliitoksissa asennus on varattu henkilölle, jolla on asianmukainen ammatillinen pätevyys.

Các thông số bổ sung

Danh mục hàng: IVAR.FM - kierretulpat
Bảo hành: 2 năm
Trọng lượng: 1.168 kg
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:11:11

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 15.09.2026 19:22
Chcel by som sa informovať, či je tento filter vhodný na inštaláciu pred plynový kotol s prípojkou 6/4" v rodinnom dome, kde prevádzkový tlak plynu nepresahuje 4 bary, a či filtrancia 10µm je dostatočná na ochranu regulačnej armatúry kotla pred nečistotami.
A avatar của tác giả 15.09.2026 19:22
Áno, pre takéto použitie je filter vhodný – tlak 4 bary je v rámci povoleného PN 6 a filtrácia 10µm štandardne postačuje na ochranu armatúr kotla pred bežnými nečistotami v plynových rozvodoch. Závit 6/4" by mal priamo pasovať na prípojku kotla. Len odporúčame filter inštalovať horizontálne, aby bol zber nečistôt čo najefektívnejší.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.