Eshop roka 2025 s vykurovacou technikou

Jakotukki P-KLASIK 3 - 1"xEK; 9-tievä; messinki IVAR.CS 553 VP

Mã số: 553977
Chưa được đánh giá Chi tiết đánh giá
835,17 € –20 %
Vykurovacia technika Zostava rozdeľovač/zberač- pre podlahové vykurovanie - skriňa  P-KLASIK 3 - 1"xEK; 9cestný; mosadz
835,17 € –20 % 668,14 € / Cái 543,20 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.CS 553 VP jakotukki-sarja, koko: 1" x EK, 9-tie

 

  • PN 10, T = +90 °C
  • sarja sisältää: jakotukin säätövirtausmittareilla, keräimen sulkuventtiileillä, kiinnityskonsolit, 2 kpl palloventtiilejä ruuviliitännällä, 2 kpl läpivienti-välikappaleita automaattisella ilmanpoistoventtiilillä, kääntyvällä tyhjennysventtiilillä ja lämpömittarilla, 2 kpl tulppia
  • materiaali messinki CW617N

 

Huomio:
 
Ennen kuin otat lämmitysjärjestelmän käyttöön, erityisesti lattialämmityksen ja patterilämmityksen yhdistelmässä, kehotamme voimakkaasti järjestelmän huuhtelua valmistajan ohjeiden mukaisesti. Suosittelemme lämmitysjärjestelmän käsittelyä GEL.LONG LIFE 100 -valmisteella.
Myyjä ei ole vastuussa järjestelmän epäpuhtauksien aiheuttamista toimintarikkoumista.

Usein kysyttyä

  • Miten voin tarkistaa, että tämä osa on yhteensopiva jakotukkoni kanssa? Vertaa kierteen/liitännän tyyppiä (esim. Eurokonus EK, M30x1,5) ja tuotteen nimessä mainittua kokoa omien jakotukki-teknisiin tietoihin - eri valmistajien messinkiset jakotukit voivat olla eri liitäntäkokoja.
  • Onko asennus ammattilaisen tehtävä? Yksinkertaisten osien (konsolit, ruuviliitännät, virtausmittarit) asentaminen jo asennettuun jakotukkiin onnistuu myös taitavasta kotityöläisestä; toimivan lämmityspiirin liittäminen ja säätö suosittelemme tarkistuttaa lämmitysteknikolla.
  • Miksi messinki on yleinen valinta jakotukkeihin ja niiden lisävarusteisiin? Messinki on pitkäaikaisesti testattu materiaali, joka kestää korroosiota vesijohto- ja lämmitysjärjestelmissä, käsitellään helposti tarkasti kierteisiin ja kestää lämmitysveden tavallisia käyttölämpötiloja ja -paineita.

Các thông số bổ sung

Danh mục hàng: IVAR.CS 553 VP ilman pumppua
Bảo hành: 2 năm
Trọng lượng: 20.178 kg
EAN: 8595145905218
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:09:14

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

D avatar của tác giả 10.11.2026 11:23
Does this manifold already include the air vent and drain valve, or do I need to order those separately? Also, can I replace just the ball valve unions if mine get worn out later, or are they fixed to the body?
A avatar của tác giả 10.11.2026 11:24
Yes, it's all included - the set comes with 2 pass-through pieces with automatic air vent valve, a rotary drain valve, and a thermometer, so you don't need to buy those separately. The ball valves with unions are separate components too, just attached to the manifold, so if one wears out down the line you can replace just that part rather than the whole unit. Everything's brass (CW617N), so it holds up well long-term anyway.
C avatar của tác giả 12.10.2026 14:05
Je suis un peu perdu, est-ce que ce coffret avec ses 9 voies et son matériau en laiton va vraiment bien avec mon installation de chauffage par le sol sans avoir besoin d'un pro pour tout changer ?
A avatar của tác giả 12.10.2026 14:05
Oui, ce modèle IVAR.CS 553 VP est conçu spécifiquement pour les systèmes de chauffage par le sol avec des connexions standard. Comme il inclut déjà tous les débitmètres et vannes nécessaires, un bricoleur expérimenté peut souvent l'installer sur un collecteur existant si les filetages correspondent. Pour être sûr, vérifiez simplement que votre ancien collecteur a aussi des raccords de type cône européen EK comme indiqué sur la fiche produit.
J avatar của tác giả 26.12.2021 21:16
Dobry den . Chcel by som sa opitat ci mozem napojit na viac cestny rozdelovac napojit na jednu vetvu viac radiatorov .
A avatar của tác giả 26.12.2021 21:16
Dobrý deň, Ono je to možné, avšak ešte som nevidel, že by sa to takto bežne robilo. Pekný deň.
M avatar của tác giả 26.12.2021 21:14
Dobry den, chcem kupit rozdelovac na 9 okruhov raditorveho kurenia. Neviem sa rozhodnut, ktory je vhodnejsi: nererovy alebo mosadzny? Radiatory su hlinikove, trubky budu plastove. Dakujem vopred za odpoved,
A avatar của tác giả 26.12.2021 21:15
Dobrý deň, Je úplne jedno, ktorý si vyberiete. Nám sa najviac predávajú nerezové. Prajem pekný deň

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.