Eshop roka 2025 s vykurovacou technikou

Kiinnike jakotukkiin - 1" - yksinkertainen IVAR.AC 609

Mã số: 500902
Chưa được đánh giá Chi tiết đánh giá
6,56 € –19 %
Vykurovacia technika Upevňovacia konzola - k rozdeľovaču- 1"; jednoduchá
6,56 € –19 % 5,25 € / Cái 4,27 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Kiinnityskonsoli - jakotukille - 1"; yksinkertainen

  • IVAR.AC 610, 611 – kaksois, IVAR.CS 501, IVAR.CI 553, IVAR.CS 553, IVAR.CI 557, IVAR.UNIMIX ja IVAR.COMBITOP tyyppisille jakotukille
  • IVAR.AC 609 – yksinkertainen, IVAR.CS 501, IVAR.CI 553, IVAR.CS 553, IVAR.CI 557, IVAR.UNIMIX ja IVAR.COMBITOP tyyppisille jakotukille
  • IVAR.AC 628 – kaksois, IVAR.CI 400 ja IVAR.CS 200 tyyppisille jakotukille
  • IVAR.AC 639 – yksinkertainen, IVAR.CI 400 ja IVAR.CS 200 tyyppisille jakotukille
  • materiaali sinkitty teräs, vuoraukset kumi

Usein kysytyt kysymykset

  • Miten valita oikea jakotukki/lisävaruste? Ohjaa tarvittava määrä piirejä ja liitoskoko - sen on vastattava lämmönlähteen pääsyöttöputken halkaisijaa.
  • Onko asennus suoritettava ammattilaisen toimesta? Jakotukin ja sen lisävarusteiden asentaminen onnistuu myös taitavasta kotona mestarilta, suosittelemme kuitenkin lämmitysjärjestelmän toiminnan ja säätämisen jättämistä lämmitysteknikon tehtäväksi.

Các thông số bổ sung

Danh mục hàng: IVAR.AC 609-639 - kiinnityskonsoli - jakotukille
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:07:44

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

A avatar của tác giả 25.10.2026 09:45
Bună, am un distribuitor IVAR.CS 501 și vreau să știu dacă această consolă simplă se potrivește la el sau trebuie neapărat una dublă? Mă rog, e pentru o conductă de 1 inch.
A avatar của tác giả 25.10.2026 09:45
Salut! Da, varianta simplă (IVAR.AC 609) este exact ce îți trebuie pentru distribuitorul tău IVAR.CS 501, fiind făcută special pentru acest model. Materialul este oțel zincat cu garnituri din cauciuc, deci ar trebui să fie foarte stabil. Nu ai nevoie de cea dublă decât dacă montezi două unități alăturate.
R avatar của tác giả 31.08.2026 21:56
Rád by som sa informoval, či je táto upevňovacia konzola určená výhradne pre rozdeľovače so závitom 1 palec, alebo ju možno použiť aj pri rozdeľovačoch s iným priemerom pripojenia.
A avatar của tác giả 31.08.2026 21:56
Táto konzola je navrhnutá pre rozdeľovače s pripojením 1", takže ak máte rozdeľovač s iným rozmerom, nebola by to správna voľba. Pre istotu odporúčame skontrolovať rozmer vášho rozdeľovača pred objednaním. V našej kategórii upevňovacích konzol nájdete viacero variantov, takže si viete vybrať ten správny.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.