Eshop roka 2025 s vykurovacou technikou

Jakotukki - asennettu säätöruuveilla - 1"xEK; 6-tievä; messinki IVAR.CI 553

Mã số: 501464
Chưa được đánh giá Chi tiết đánh giá
146,37 € –20 %
Vykurovacia technika Rozdeľovač - osadený regulačnými šróbeniami  - 1"xEK; 6cestný; mosadz
146,37 € –20 % 117,10 € / Cái 95,20 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

Jakotukki - varustettu säätöruuveilla, IVAR.CI 553, koko: 1" x EK, 6-tie, kotelo: P2/N2

 

  • PN 10, T = +120 °C
  • tarkoitettu lattialämmityksen syöttöveden virtauksen säätöön
  • sivutulot 1“ F
  • poistot 3/4“ EK
  • poistojen väli 50 mm
  • varustettu säätö- ja sulkuruuveilla
  • materiaali messinki CW617N
  • myyjä ei vastaa järjestelmän epäpuhtauksista aiheutuvista toimintarikkoumista

 

Huomio:
 
Ennen kuin otat lämmitysjärjestelmän käyttöön, erityisesti lattialämmityksen ja patterilämmityksen yhdistelmässä, kehotamme voimakkaasti järjestelmän huuhteluun valmistajan ohjeiden mukaisesti. Suosittelemme lämmitysjärjestelmän käsittelyä GEL.LONG LIFE 100 -valmisteella. Myyjä ei vastaa järjestelmän epäpuhtauksista aiheutuvista toimintarikkoumista.

Usein kysyttyä

  • Miten valita oikea jakotukki/lisävaruste? Ohjaa tarvittavan kierrosten lukumäärän ja liitoskokoon - sen on vastattava lämmönlähteen pääsyöttöputken halkaisijaa.
  • Onko asennus suoritettava ammattilaisen toimesta? Jakotukin ja sen lisävarusteiden asentaminen onnistuu myös taitavasta kotityöläisestä, suosittelemme kuitenkin lämmitysjärjestelmän kytkemisen ja säätämisen jättämistä lämmitysteknikon tehtäväksi.

Các thông số bổ sung

Danh mục hàng: IVAR.CI 553 - jakotukki säätöventtiileillä
Bảo hành: 2 năm
Trọng lượng: 1.754 kg
EAN: 8595145900503
Tyyppi: jakotukki
Jakotukin materiaali: messinki
Piirien määrä: 6
Virtausmittarit: ilman virtausmittareita
Jakotukin liitäntä: 1"
Saatavuus: Varastossa tai toimittajalla
Hinnan viimeisin päivitys: 13.04.2026 1:09:49

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

J avatar của tác giả 06.11.2026 21:30
Ich plane den Einbau eines Verteilers für eine Fußbodenheizung mit sechs Kreisen und benötige eine verbindliche Bestätigung, ob das Gehäuse des IVAR.CI 553 mit dem Messingwerkstoff CW617N tatsächlich für Vorlauftemperaturen bis zu 120 Grad Celsius ausgelegt ist. Zudem möchte ich sicherheitshalber klären, ob die seitlichen Eingänge von einem Zoll entsprechen, da meine zentrale Zuleitung genau diese Dimension aufweist.
A avatar của tác giả 06.11.2026 21:30
Der Heizkreisverteiler IVAR.CI 553 ist laut Spezifikation mit einem Gehäuse aus Messing CW617N ausgestattet und kann Temperaturen von bis zu +120 °C problemlos bewältigen. Die seitlichen Eingänge haben einen Durchmesser von 1 Zoll, was der Größe Ihrer Zuleitung entspricht, während die Ausgänge einen Abstand von 50 mm haben. Bitte beachten Sie vor der Inbetriebnahme unbedingt die gründliche Spülung des gesamten Systems gemäß Herstellerangaben.
Z avatar của tác giả 09.10.2026 19:21
Czy w przypadku tego rozdzielacza IVAR.CI 553, przy wymiarach wejścia 1" F i wyjść 3/4" EK, odstęp między otworami wynosi 50 mm, co jest kluczowe dla mojego projektu montażowego?
A avatar của tác giả 09.10.2026 19:21
Tak, zgodnie ze specyfikacją techniczną produktu odstęp między wyjściami 3/4" EK wynosi dokładnie 50 mm. Rozdzielacz ten posiada obudowę z mosiądzu CW617N i jest przystosowany do pracy z wodą grzewczą o temperaturze do +120 °C. Przed uruchomieniem systemu warto pamiętać o przepłukaniu instalacji oraz zabezpieczeniu jej preparatem GEL.LONG LIFE 100.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.