Eshop roka 2025 s vykurovacou technikou

Elektrohydraulinen puristin IVAR.MINI-PRESS 22V ACC – 21,6 V / 2,5 Ah akku tai 230 V verkko, ilman puristusleukoja

Mã số: 578014
Chưa được đánh giá Chi tiết đánh giá
2 108,22 € –20 %
Elektrohydraulický lis IVAR.MINI-PRESS 22V ACC – akumulátor 21,6 V / 2,5 Ah alebo sieť 230 V, bez čeľustí
2 108,22 € –20 % 1 686,58 € / Cái 1 371,20 € Ngoại trừ thuế VAT Giá đo lường:
Giao hàng quốc tế
Varastossa toimittajalla

Thông tin chi tiết

Mô tả chi tiết sản phẩm

IVAR.MINI-PRESS 22V ACC (kód 578014) on kompakti elektrohydraulinen puristin tavallisille puristusliittimille teräs-, ruostumattomasta teräksestä, kupari-, muovi- ja monikerrosputkille halkaisijaltaan 10–40 mm (3/8"–1 1/4").

Ominaisuudet

  • puristusvoima 22 kN, pakotettu toiminta – puristus suoritetaan loppuun asti
  • kiertonen pää ja integroitu LED-valo
  • Li-Ion 21,6 V / 2,5 Ah -akku, joka kestää 50 % enemmän puristuksia kuin 14,4 V -akut
  • mahdollisuus verkkovirran syöttöön 230 V:n verkkovirtalähteen kautta (kód 571567)
  • paino 2,5 kg, mitat 273 × 260 × 75 mm

Pakkaus

Puristin toimitetaan laukussa yhdessä akun ja nopealaturin kanssa. Puristusleuat eivät sisälly pakkaukseen, ne valitaan järjestelmän ja putken koon mukaan. Toinen akku 21,6 V / 2,5 Ah on koodilla 571571.

Puristin ja akku toimivat lämpötiloissa -10 °C – +60 °C, nopealaturi 0 °C – +40 °C; säilytä yli 0 °C lämpötilassa.

Tekniset tiedot

Koodi578014
MerkkiIVAR
TyyppiIVAR.MINI-PRESS 22V ACC
Virtalähde21,6 V / 2,5 Ah Li-Ion-akku tai 230 V verkkolähde
Puristusvoima22 kN
Putken halkaisijaØ 10–40 mm (3/8"–1 1/4")
Paino2,5 kg
Mitat273 × 260 × 75 mm
Käyttö Lämpötila-10 °C – +60 °C
Pakkauslaukku, akku, nopealaturi
Puristusleuatei sisälly pakkaukseen

Usein kysytyt kysymykset

Ovatko puristusleuat pakkauksessa?
Ei. Pakkaus sisältää puristimen, 21,6 V / 2,5 Ah -akun, nopealaturin ja laukun, puristusleuat ostetaan lisämaksusta järjestelmän ja putken koon mukaan.

Voidaanko puristinta käyttää ilman akkua?
Kyllä, 230 V / 21,6 V -verkkovirtalähteen (koodi 571567) kautta sitä voidaan syöttää suoraan verkkovirrasta. Lähde myydään erikseen.

Mitä putkia puristin käsittelee?
Tavalliset puristusliittimet teräs-, ruostumattomasta teräksestä, kupari-, muovi- ja monikerrosputkille halkaisijaltaan 10–40 mm.

Các thông số bổ sung

Danh mục hàng: sähköhydrauliset puristimet
Bảo hành: 2 năm
Trọng lượng: 2.5 kg
Saatavuus: Varastossa tai toimittajalla
Koodi: 578014
Tunnus: IVAR
Malli: IVAR.MINI-PRESS 22V ACC
Virransyöttö: 21,6 V / 2,5 Ah Li-Ion akku tai 230 V verkkovirta
Puristusvoima: 22 kN
Putken halkaisija: 10–40 mm (3/8"–1 1/4")
Paino: 2,5 kg
Mitat: 273 × 260 × 75 mm
Käyttölämpötila: -10 °C – +60 °C
Pakkauksen sisältö: laukku, akku, nopealaturi
Puristusleuat: ei sisälly pakkaukseen

Đánh giá sản phẩm

Hãy là người đầu tiên đăng bài báo về mặt hàng này!

Đừng điền vào ô này

Bạn đánh giá sản phẩm này như thế nào? Chọn từ 1 đến 5 sao, trong đó 1 là tệ nhất và 5 là tốt nhất.

Thảo luận

Đừng điền vào ô này

Danh sách các thảo luận

R avatar của tác giả 15.11.2026 21:27
My dad needs a press tool for pipes between 10 and 40 mm, but he's worried about using it in cold attics. Does this IVAR.MINI-PRESS work down to -10 °C, and can I use the mains adapter if the battery dies?
A avatar của tác giả 15.11.2026 21:27
Yes, Richard, this tool handles temperatures from -10 °C up to +60 °C, so it should be fine in most attics. You can also switch to the 230 V power adapter (code 571567) whenever you need to plug it into the wall instead of relying on the battery. Just remember that jaws aren't included, so you'll need to pick those separately based on your specific pipe system.

IVAR designs, develops and manufactures highly energy-efficient heating and plumbing systems. We have over 10,000 catalogue items - mass-produced products and unique items - in addition to customised systems and combinations of complex products. And it’s all “Made in Italy”.

 

Vision
To make life easier for our clients, our clients' customers and our employees, thanks to our ability to be constantly innovative.

 

Mission
To design and manufacture advanced hydronic solutions that reduce installation complexity and energy consumption.

 

“Made in Italy” adds value

IVAR has been producing heating and plumbing system components since 1985: valves for heating bodies, direct heat metering modules, heat cost allocators, pipes and fittings, substations for heating systems, distribution manifolds, radiant panel systems, and components for solar and geothermal systems. And it’s all “Made in Italy”.
Over 200 people are employed at our manufacturing facilities in Prevalle (in northern Italy’s Brescia province). The site has been designed to streamline our many production and operational stages.

The Italian headquarters also acts as a hub for the wider IVAR Group, set up with the goal of distributing products beyond Italy’s borders. The group now has 11 branches, in Australia, Belgium, China, Germany, the United Kingdom, the Czech Republic, Romania, Slovakia, Spain, the United States and Tunisia.

 

Know How
Research, development and numerous laboratory tests guarantee that our clients’ requests can be translated into new high-efficiency products.

The stages required for production take place internally, beginning with hot forming, which is carried out at our subsidiary Valmon Stampati. Our continuous implementation of projects under the Industry 4.0 initiative also allows us to take full advantage of new releases in technology and IT to improve our manufacturing efficiency.


As a company, IVAR is constantly evolving. Every day, we invest in strengthening our products, in improving our production processes and in attaining new patents and certifications.

Vytvořil Shoptet | Design Shoptak.cz.